RomRaider

Just wanted to say. I have one and have been using it for 7 months or so. It works awesome. easy install, easy calibration. might pick up another one of these or aem uego and splice for power from cigaretty lighter to have a portable one!

I would like to log both my Innovate LC-1 (WB AFR) data and the data from a TC-4 thermocouple reader (2XEGT & 2XCHT).

The serial data format is the same and I would like to log through the port on the Tactrix cable to the SD card.
How do I setup the logcfg.txt file to do this?

Read through the samples\logging configs in the EcuFlash install directory. There's one for LC-1 & TC in the file 'subaru k-line adc lc1.txt'.
Or in RomRaider Logger just use the Innovate MTS plugin. Make sure the units are all linked together.

I know this has probably been beat to death, but I'm just looking for clarification.

I have the MTX-L and I'm going to wire it in and purchase one of the 2.5mm adapters to get that up and running.
I understand that this will log to SD, but some of the directions also make it seem like this input will override another input on the OBDII port and I should be able to pick up this input in RR Logger as well?

If not, no big deal as I will run the serial to USB, but my current car tablet only has 1 USB port so trying to consolidate and tidy things up.

If you plug the WBO2 into the OP2 then all logging is performed by the OP2.
To use RR Logger whit the OP2 and the WBO2 get a serial to USB converter.

RR Logger can not read the WBO2 data when it is connected to the OP2 port.

Thanks. Was hoping for a different answer, but that works. Buying a USB hub for the tablet so I can log both.