RomRaider

OK. Set the RR Logger debug mode to TRACE and attempt to read LTV. Send me the rr_system.log file.
http://www.romraider.com/RomRaider/HowToDebug

Thank you very much. Will be done in 1,2days

Here is the rr file , thank you very much for your help in advance.

In your log I see no attempts to read the learning tables.

But even if you try it will fail as I see your ECU is not included in the latest Logger definition, I'll need to add it in the next update.

BTW: I see you use K-line fast poll mode, CAN should work for you but you will also need to apply the "Subaru CAN Enhanced RAM Parameter Logging" patch in EcuFlash (last entry in the table list) to your ROM and then flash that update to the ECU. This will allow reading extended RAM parameters once I update the logger.xml.

Thank you so so so much dschultz.

Thank you very much indeed.

The latest logger definition includes your ECU, does LTV work for you now?

Thank you so much. Will try in one two days time and update. Thank you.

Thank you so much Dschultz, using LTV fine now, thanks heaps.
Sorry for the late update, went overseas

Is this where to inquire about Learning view ECU ID updates. Two previous locked threads led me here. I apologize in advance if it is not.

If I have done everything correctly and I've not missed a step, then my ECU is not currently supported and ID not recognized.

Using LV v1.0RC3

my ECU ID is 6284A76284. Thanks in advance for the help.

If it's not in this list then the ROM has not been defined.

Using the latest SD Logger defs and Carberry RR defs I still can't get Learning View to correctly display the MAP ranges instead of false g/sec ranges. Also, the g/rev load columns are halved from what they show in romraider.

And that funky number. yeah, that guy.



this is a LTV pull from romraider during the hottest day this year, with the A/C on full, traffic at it's worst, short ram/hot air intake, ect.

Thank you so much for this feature, it's the only way to pull Learning Tables on newer cars!

Have you considered making it a semi-stand alone application? As in being able to check the Learning tables without firing up Logger (which takes a long time on my laptop), but it would still use the logger definition files?

Semi old thread here, but will the tune.hex trick work with this as it did on LV standalone app prior?

I am one of the unfortunate 512kb USDM 04sti's...

Not at this time.