RomRaider

There is need for a tag that will turn off editing for a particular axis and will be read-only. My throttle% (boost/wdc) calculations for certain EDM revisions are estimates based on the highest cell at 100% and there seems to be 4 different versions to this. I know by looking at the boost numbers that the last cell most likely is 80%-100%, but I don't know where in the range it falls. If someone attempts to rescale the throttle (especially on those that have large gaps between the WOT column and part-throttle), it might have unexpected results.

Also, on certain DBW tables, the axis is shared by more than one table, so someone editing one table will affect multiple tables. They are not something that would be useful to edit for tuning anyway - such as the coolant or intake temperature axis for wastegate compensation, so turning off editing would not affect tuning.

Ok, I'll go ahead and add that to the task list.. "Static" seems like a good attribute name but it's taken. "Locked" sound good?

Sounds good.