RomRaider

Hello!

Brand new to the tuning world and I am looking to make the jump to learn. I have been doing some research but figured that this would be the best place to get some answers. Already have the Tactrix cable and applications just need to know/find out where to begin. This will have to be a fresh, from scratch tune (I'd assume lol) and don't really know where to start or if I should just start with the stock map and build off that? Any insight/help/tips on how to get started would be GREATLY appreciated!

Full build list is as follows:

Outfront Motorsports V3 Closed Deck, Valve & Head Job
ARP 1/2" Head Studs
Brand New B25 Heads
Manley Turbo Tuff Extreme Duty Pistons (99.75mm)
Manley H-Tuff Connecting Rods
Brian Crower 272 Cams Set
604 Shimless Valve Buckets
GSC Beehive Valve Springs with Titanium Retainers
GSC Polished Exhaust Valves (33mm +1mm)
GSC Polished Intake Valves (33mm +1mm)
GSC Manganese Bronze Exhaust Valve Stoppers
GSC Manganese Bronze Intake Valve Stoppers
JE Pro Seal Head Gaskets
IAG TGV Deletes
New OEM 2017+ Nitride Treated Crankshaft
New OEM AVCS Cam Gears
ETS Front Mount Intercooler (3.0" Core)
ETS Front Mount Intercooler Piping (Rotated)
GrimmSpeed Unequal Length Header
FIC 1650cc Injectors
iWire Speed Density Kit
iWire Fuel Pump Hardwire Kit (With Pressure Sensor)
Dual AEM 340 lph Fuel Pumps
IAG Top Feed Fuel Rails
Aeromotive A1000 Fuel Pressure Regulator
Radium Fuel Pressure Gauge
Precision Turbo 6262
Tial BOV
GrimmSpeed 3-Port Electronic Boost Controller
Tial 38mm External Wastegate

if you dont have a base file to start with then yes start with a stock map and start making adjustments for the mods you have - then load it, log it, adjust it, repeat the cycle until its good