 |
RomRaiderOpen Source ECU Tools |
|
RomRaider
Documentation
Community
Developers
|
|
Page 1 of 1
|
[ 1 post ] |
|
| Author |
Message |
|
mryork
|
Post subject: 2004 Baja with 2006 ECU Missing Injector Pulse Width (IPW) Posted: Sun Jul 13, 2025 2:41 pm |
|
 |
| Newbie |
Joined: Sun Jul 13, 2025 2:27 pm Posts: 1
|
|
So I've done more troubleshooting for a while and have a decent build list going here on this 2004 Baja. I have done every step of troubleshooting down to where i just needed a new FPR, so i went with a regulator, line, and rail kit. Starts way smoother however i am at -25 correction main. On a 2006 Baja XT AT Ecu, I've done some digging but I'm struggling.
I have no min injector pulse width tables on my 06 1mb Baja ECU, it's not immobilized so I don't think I can use another ROM?
I have adjusted the FPR to be sitting properly where it wants to be at. If I am able to find a 06 Baja MT XT Rom that would be sweet. I came from a 04 Baja XT MT ECU and went from 5 speed to 6 speed with working VSS
I bricked my 04 ECU from being a little too silly and ignoring an error, can fix it with a bench flash but I'm not confident enough to do that. Any idea on what I can do to get it running enough with no Low IPW? Or maybe adding in IPW tables to the rom?
Runs great besides -25 correction
Attached a Startup log, mod list, and current rom
|
|
| Top |
|
 |
|
Page 1 of 1
|
[ 1 post ] |
|
Who is online |
Users browsing this forum: No registered users and 1 guest |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|
|