P000D Code - RR logger not reading active code

ravieg29 · **Posted:** Tue Sep 16, 2025 10:21 pm

As title states, is this a known thing? I looked through the logger defs and the P000A - P000D codes are not in there. Read codes with RR logger shows no codes, btssm shows no codes. I use a generic elm327 bluetooth adapter and picks up the code under obdii read, but NOT in the ecu read. Are these codes just not available for RR to read? Just looking for info/answer so i can sleep better :mrgreen:

2016 STi , Dime-Mod based on AE5T201V rom.

unclefrosty9 · **Joined:** Sat Sep 18, 2021 2:10 pm **Posts:** 15

ravieg29 wrote:

As title states, is this a known thing? I looked through the logger defs and the P000A - P000D codes are not in there. Read codes with RR logger shows no codes, btssm shows no codes. I use a generic elm327 bluetooth adapter and picks up the code under obdii read, but NOT in the ecu read. Are these codes just not available for RR to read? Just looking for info/answer so i can sleep better :mrgreen:

2016 STi , Dime-Mod based on AE5T201V rom.

Use a generic wired scanner. I found when an opensource map has phantom codes like this I can still pull the codes up with the generic scanners. specifically I USED A CR123 yesterday, and a cheap 30$ one as well.

or see if a local place that offers free code reading can do it before you go buy a cheap scanner

benflynn · **Joined:** Tue Jul 14, 2020 5:11 pm **Posts:** 44

ask Demitry for help.
i did run into some undefined codes on 2015 STI, had to read it with SSM4. Ended up hooking rear o2 and some egr stuff back up to get them to go away

you can use ssm4 with your tactrix by changing the tactrix dll file for the oem device dll

dschultz · **Posted:** Thu Oct 02, 2025 11:29 am

You most likely need to update the ECU definition file. See viewtopic.php?p=166384#p166384 for the updated DTC listing.

RomRaider

Forum rules

P000D Code - RR logger not reading active code

Who is online