RomRaider

I recently flashed the stage 1 map from osecuroms.org, and everything is really good until the next day. Right after I flash the map the power is there, boost is spot on, and everything feels good. In about a day, the car reverts back to stock boost levels and feels more down on power.

What gives? I have some logs taken right after the ecu was flashed and everything is working fine.

One is a second through third gear pull and the other is just a third gear pull. Both Uphill.

http://star.walagata.com/w/ronzar/1432910922009.csv

http://star.walagata.com/w/ronzar/7855868.csv

right click save as

You'll want to log your ignition advance multiplier (IAM) and see what the current value is. If you are using ECUexplorer, you'll have to find the correct address and add this "user-defined" item.

logged with the IAM with the tari software. Never went below 16 on both pulls.

pull 1 is second through third going uphill. Pull 2 is the same thing, same hill, same map and same car. Just a different day.

http://star.walagata.com/w/ronzar/pull1.csv

http://star.walagata.com/w/ronzar/pull2.csv

The only difference i can see between the logs is boost and WGD. I have no idea what's causing the computer to do this. Anyone have any ideas?

EDIT: do you have any of the original logs when you were hitting target boost?