RomRaider
https://mailserver.romraider.com/forum/

ISO: 08-14 EJ257/D25 SAVCS w/ TD06 20g, stock fuel map
https://mailserver.romraider.com/forum/viewtopic.php?f=26&t=21490		 Page 1 of 1
Author:  EastCoastNBWrx [ Thu Sep 19, 2024 4:37 pm ]
Post subject:  ISO: 08-14 EJ257/D25 SAVCS w/ TD06 20g, stock fuel map
As the posts states, I’m seeking anyone that may have something I can run until I finish upgrading to FMIC, Bigger injectors, etc.

08 WRX with a 15’ EJ257 short block, D25 Single AVCS heads (8:77:1 CR, East Coast about 600ft elevation) newly mounted TD06SL2 GTX3071 ball bearing. Stock injectors, stock top mount, Grimmspeed 3 port, TGV delete, secondary air delete, catless DP. Conservative is key here until can finish installing the remaining bolt ons and get with my tuner in person. Thanks in advance!
Author:  25fxti [ Fri Sep 20, 2024 9:55 pm ]
Post subject:  Re: ISO: 08-14 EJ257/D25 SAVCS w/ TD06 20g, stock fuel map
If you need something to get going, you can try copy some of maps shared 2006 FXT 6MT STI EJ257 ARASHI G25/660 TD06SL2 viewtopic.php?f=29&t=18706

that was map that hit 315whp, very conservative.
Author:  EastCoastNBWrx [ Fri Sep 20, 2024 10:04 pm ]
Post subject:  Re: ISO: 08-14 EJ257/D25 SAVCS w/ TD06 20g, stock fuel map
25fxti wrote:
If you need something to get going, you can try copy some of maps shared 2006 FXT 6MT STI EJ257 ARASHI G25/660 TD06SL2 viewtopic.php?f=29&t=18706

that was map that hit 315whp, very conservative.




I will go over now, super helpful! Thanks!
My ECU is still tuned for my VF52, peaking 20psi with the current set up (minus the 20g) so I thought I’d be relatively okay, that was until I found out what 26lbs up the on-ramp felt like :? Thank god for ARP studs :lol:
Author:  25fxti [ Mon Sep 23, 2024 11:34 pm ]
Post subject:  Re: ISO: 08-14 EJ257/D25 SAVCS w/ TD06 20g, stock fuel map
Get FMIC and you will be fine with 26 pounds :mrgreen:
Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/