RomRaider

My car was "tuned" opensource by PO, but since I'm going to be adding VF39 and sti injectors. I need a Base map, and also if you want to look at my current tune and see problems with it. Go ahead, because it run around 12.2afr's at WOT at 17-18psi, which seems little lean for my liking. Rather have 11.0-11.5 at WOT. I'm new too Subaru, but I've tuned my turbo miata with tunerstudios(Speeduino efi). With this build, I just want 300-350hp.

Basemap for 02 bugeye with mods are

VF39
Pink injectors(STI)
CAI
Catless downpipe
Tsudo Exhaust
Unequal length headers
EBAY TMIC
HKS BOV
TGV delete
evap delete
93 octane(Florida,United States)

Hi,

any luck as of yet.

From what I can see in your tune the MAF Scaling has not been calibrated to suit your CAI which would possibly add to why you are leaning out.

you can either calibrate your maf sensor or you can cheat and compensate by richening up your Primary fueling map. from 11 down to 10 to get your afr down in the 11's.

as for your injectors, you can find an STi stock rom and take the injector data and copy them over to your map.

I would also recommend adding in a WOT log or 2 to see how your car is managing itself as it is. but if you have modified since last I would suggest don't do any hard pulls until you get a tune or get a base map in so you can drive around.