RomRaider

Hi.
I am trying to connect to the switchboard using Learning View but I miss this error in the log:

[15:50:40.8305817] Learning View version 1.0 RC3

[15:50:43.3154022] PassThruOpen returned 0 and DeviceID 1
[15:50:43.3154022] PassThruReadVersion returned 0
[15:50:43.3154022] Device firmware version: 1.16.4769
[15:50:43.3309711] DLL version: 1.02.4798 Jun 13 2016 17:16:24
[15:50:43.3309711] API version: 04.04
[15:50:43.3465963] PassThruConnect returned 0 and ChannelID 3
[15:50:43.3622234] PassThruStartMsgFilter returned 0
[15:50:43.3778453] ECU Init
[15:50:43.4404060] PassThruWriteMsgs returned 0
[15:50:43.4559524] WRITE 6 bytes: 80 10 F0 01 BF 40
[15:50:43.5028340] PassThruReadMsgs returned 0
[15:50:43.5340956] READ 0 bytes
[15:50:43.5966484] PassThruReadMsgs returned 0
[15:50:43.6121942] READ 62 bytes: 80 F0 10 39 FF A2 10 11 43 42 59 40 06 F3 FA CB 84 2B 83 FE AC 00 00 00 60 CE D4 FC B0 60 00 00 00 00 00 00 00 00 DC 00 00 75 1F 30 80 F0 C2 00 00 43 80 00 F0 89 02 00 00 00 00 0C F0 4D
[15:50:44.1590215] ECU supported (ECUID:4342594006 CALID:A8DH200Z DESC:06 EDM Impreza STi MT):
[15:50:44.1746450] Auxillary Parameters
[15:50:44.2840636] PassThruWriteMsgs returned 0
[15:50:44.2997698] WRITE 16 bytes: 80 10 F0 0B A8 00 00 00 23 00 00 12 00 00 08 70
[15:50:46.3469989] PassThruReadMsgs returned 16
[15:50:46.3782810] PassThruGetLastError returned 16, Message: no data was read
[15:50:48.9568986] An error has occured: PassThru Error
[15:50:48.9724368] PassThruDisconnect returned 0
[15:50:48.9880931] PassThruClose returned 0

hello?
please....

Use LTV in RR Logger.

ok
thank

LV in RR says that ECU definition is missing,but it is in the RR folder. With all the same files in RR folder LV works fine in another computer, but not in mine.
Im using v336 extended logger definitions. Ecu defs attached.
What is missing?