RomRaider

When logging get's sorted it would be benefical to have the ability...

- Log AFR's via TurboXS Tuner Standard/Pro or Innovate Motorsports LM-1 & LC-1. Support for other AFR meters in due time.

- Fast logging > Allows double the resolution for logging data. For example the data has smaller increments for more precise diagnoses.

- MAFv > As you know very handy to indicate if you have a restriction when MAFv stop rising. Can not find this parameter in ecuExplorer?

Cheers~!

MAFv is there, I log it all the time.

+1.

This is a limitation of the protocol. Nothing can really be done. kascade will be adding priorities for certain parameters so they will have better resolution than others you might be logging but around 10hz is the fastest it'll ever get.

I've got a tuner pro and have written java code in the past to pull AFRs. This shouldn't be too hard.

qoncept that sounds great. It just makes tuning the little more accurate. I wish I could program but I'm a newtork engineer.

Which parameter is MAFv for 32bit ECU's? I must be blind as its not jumping out at me!

Tgui you are too quick and AFR logging will just top it off. RomRaider is coming along nicely.

EDIT: Need to give credit where its due. Thanks to the tuning help of ev8siv3 and west_minst my MPH went from 101MPH to 107MPH in the short time tuning with RomRaider. Again much appreciated fellas...

FYI - The parameter for MAFv is Air Fow Sensor Voltage (V) on 32bit ECU's. Most of you already know this but may help others?