RomRaider

im mainly looking for a map to get me started setup is as follows-
Tdo4l with a factory wastegate with that arm spun all the way out
cobra elbow into an aem intake with all my pcv and breathers routed back to intake
inferno labs catless upipe
crucial racing catted downpipe
no name uels
no name 3in catback
rev9 FMIC
turbo xs 50/50 hybrid bov
aem afr wideband and gauge
no name boost gauge
..........................................
as far as parts i havent installed goes i have wrx blue injectors and perrin rails ptfe lines as well as the wrx sending unit with the third outlet for what im hoping will become a factory style return as well as a tomei fuel pressure regulator. and a turbosmart manual boost controller

i tried to do some tuning myself i have a tactrix romraider and ecuflash but im pretty sure ive bricked the ecu so i ordered a new ecu which should be here within a couple days. ecuflash fails to contact the ecu and when i turn the key a relay near the ecu continously clicks and the fuel pump just keeps pumping car doesnt start

My boost gauge is peaking at 10 psi so i am staying out of boost all together. but as expected the ecu throws codes for manifold absolute pressure high. which leads to the car limiting the rev limit (limp mode)

ill take any help i can get at this point mainly to prevent me bricking the new ecu

Also chasing same map please,

08 AUS 2.5i N/A ecu : 5252164007 ( case says 22611AN280 )
have recently done td04l on china headers with a 2.5 dump and 2.25" up pipe, single cat, fmic. running 4 psi ( have screwed mine just enough out that gate opens fairly early. )

Thanks
Pete.