RomRaider

Hi, Noob here so please go easy!

EcuFlash works to download and reprogram ECU with the Tactrix OpenPort 2.0. I can't get Learning View to work for some reason. It indicates a read error. As far as I can tell it does support my ECU - 08 Subaru Foreter XT - A8Dk100D 32 bit CPU. Any suggestions to get this to work?
Thanks

Here is a log file:
[19:25:53.1280131] Learning View version 1.0 RC3

[19:26:02.0621623] PassThruOpen returned 0 and DeviceID 1
[19:26:02.0621623] PassThruReadVersion returned 0
[19:26:02.0621623] Device firmware version: 1.16.4769
[19:26:02.0621623] DLL version: 1.02.4798 Jun 13 2016 17:16:24
[19:26:02.0778000] API version: 04.04
[19:26:02.0778000] PassThruConnect returned 0 and ChannelID 3
[19:26:02.0778000] PassThruStartMsgFilter returned 0
[19:26:02.0933981] ECU Init
[19:26:02.1403338] PassThruWriteMsgs returned 0
[19:26:02.1403338] WRITE 6 bytes: 80 10 F0 01 BF 40
[19:26:02.2028341] PassThruReadMsgs returned 0
[19:26:02.2498385] READ 0 bytes
[19:26:02.3904755] PassThruReadMsgs returned 0
[19:26:02.4529685] READ 110 bytes: 80 F0 10 69 FF A2 10 11 4E 12 50 41 07 F3 FA C9 8E 2B 81 FE AC 00 00 00 66 CE 54 F9 B1 E4 00 1F 20 00 00 00 00 00 DC 00 00 75 1F 30 80 F0 E2 00 00 43 FB 00 F5 C1 86 00 00 00 01 3D F1 80 00 81 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 AE
[19:26:02.9529515] ECU supported (ECUID:4E12504107 CALID:A8DK100D DESC:07 USDM Forester XT AT):
[19:26:02.9529515] Auxillary Parameters
[19:26:03.0780159] PassThruWriteMsgs returned 0
[19:26:03.0780159] WRITE 16 bytes: 80 10 F0 0B A8 00 00 00 23 00 00 12 00 00 08 70
[19:26:05.0858879] PassThruReadMsgs returned 16
[19:26:05.0858879] PassThruGetLastError returned 16, Message: no data was read
[19:26:08.1644131] An error has occured: PassThru Error
[19:26:08.1644131] PassThruDisconnect returned 0
[19:26:08.1644131] PassThruClose returned 0

Also I should add that I am running Windows 10 on my laptop with USB 2.0 ports. I uninstalled RomRaider and Java and I am trying only LV. EcuFlash is installed and working AFAIK.
Any help is appreciated.
Thx

Why don't you use learning view that is embedded in RomRaider. hit F6 on the logger.
but first and the XML file on the Romraider Editor for your Rom.

OK. I just discovered the RomRaider LV option this am. I will try this tonight. Thx for the reply.

I ran RomRaider tonight and used the Code Reader (F8) and the LV tab. Works fine.
Thanks for the help.