Tactrix Standalone SD logging Parameter IDs

Zander46 · **Joined:** Wed Sep 26, 2012 10:05 am **Posts:** 11

I've got an 02 ADM Wrx and i've managed to get the SD car logging through the Tactrix working. However i can't seem to find the paramids for all the data which i want to log.

Here are all the paramids i managed to dig up via the logging.xml file.

Attachment:

Parameter IDs A4SE900I.xlsx [16.57 KiB]
Downloaded 602 times

However, where do i find the paramids for:
Target Boost,
Initial Wastegate Duty Cycle,
Maximum Wastegate Duty Cycle,
Turbo Dynamics (burst or continuous),
OL / CL status,
Closed Loop Target AFR,
or Final Fueling Base.

Anyone got any ideas of the paramids for these values, or how to calculate them?

Cheers!

td-d · **Posted:** Wed Oct 17, 2012 9:35 am

Attached is a logcfg.txt file with all the available parameters for your rom.

Zander46 · **Joined:** Wed Sep 26, 2012 10:05 am **Posts:** 11

Perfect!!

Thanks mate!

endrswrd · **Joined:** Thu Oct 25, 2012 2:09 pm **Posts:** 49

Not trying to thread jack but I am looking to get my file fixed.

I am looking for some help generating my logcfg.txt file.

Car is 2011 USDM WRX STi 5 door

ECUID : AE5IB00V. Although, The rom currently flashed on the car may be the sedan rom. I plan on copying my tune back to the correct rom for the car, even though they both work just as expected.

I have this so far

Code:

Code:
type=ssmk

paramname = Coolant
paramid = 0x000008
databits = 8
scalingrpn = x,40,-

paramname = A/F_Correction_#1(%)
paramid = 0x000009
databits = 8
scalingrpn = x,128,-,100,*,128,/

paramname = A/F_Learning_#1(%)
paramid = 0x00000A
databits = 8
scalingrpn = x,128,-,100,*,128,/

paramname = RPM
paramid = 0x00000E
databits = 16
scalingrpn = x,0.25,*
sampinterval = 5


paramname = Throttle Opening(%)
paramid = 0x000015
databits = 8
scalingrpn = x,0.3921569,*


paramname = A/F_Sensor_#1(AFR)
paramid = 0x000046
databits = 8
scalingrpn = x,128,/,14.7,*

paramname = CL/OL_Fueling*(status)
paramid = 0xFFA44D
databits = 8
scalingrpn = x,6,+

paramname = MAFG/s
paramid = 0x000013
databits = 16            
scalingrpn = x,0.01,*
sampinterval = 2

paramname = MAFv 
paramid = 0x00001D
databits = 8
scalingrpn = x,0.02,* 

paramname = EngineLoad
paramid = 0x000007
databits = 8
scalingrpn = x,100,*,255,/

paramname = Manifold_Absolute_Pressure
paramid = 0xFF6394
isfloat = 1
scalingrpn = x,0.01933677,*


paramname = IPW ; injector #1 pulse width
paramid = 0x000011
scalingrpn = x,0.256,*


paramname = Knock_Sum*(count)
paramid = 0xFF7FEC
databits = 8
scalingrpn = x

conditionrpn = Coolant,76,>
action = start

conditionrpn = RPM,0,==
action = stop

Everything works except engine load, and CL/OL status. I am questioning MAFv but that may just be a resolution issue(numbers seem a little high for just cruising but the car is new to me so I have yet to really determine *normal numbers) . The issues with CL/OL status and engine load seem to either be incorrect scaling or incorrect paramid. Ive scoured the internet looking to correct these two params with limited success. I was able to fix many of the parameters I was targeting. (I am working on the GR stumble fix. I have a very slight stumble in the 28-3200 rpm range. Doesnt even happen very often. But I would like to smooth it out with the compensation tables for such issue.)

Any help would be appreciated. I tried pulling the data out of my logging xml file. But the values werent coming back scaled properly....

adrianyongtl · **Joined:** Thu Nov 08, 2012 12:00 am **Posts:** 1

Hi td-d,
I have been trying to get the paramids for A4TJ120S to datalog with just the openport but faced many issues as I do not understand / know how to find the relevant paramids. :oops:

Would greatly appreciate if you could do for me what you did for zander

hunterjm · **Posted:** Sun Dec 23, 2012 1:57 am

I just released a tool that should make this easier. You can see it in my topic here.

RomRaider

Forum rules

Tactrix Standalone SD logging Parameter IDs

Who is online