CarBerry ROM - EcuFlash Definitions

evojay · **Joined:** Fri Sep 30, 2016 9:35 pm **Posts:** 5

I know that.

Ive added all the def, or some of them but still cant get the right order.

Can you guys just please list what defs go where??

Id really like to get this up and running but having trouble with the definintion files since there is NO instructions on what ones to use and where to put them. When I put them all in, i still get a bunch of invalid and/or incorrect tables.

SubiCarLous · **Joined:** Mon Sep 22, 2014 3:41 pm **Posts:** 40

I found errors in the AVCS Threshold tables (Coolant and Engine Thresholds). The label always says "Disabled Below" and "Disabled Above". Just wanted to mention it, I hope it helps.

Artizle · **Joined:** Sun Jan 13, 2013 5:58 am **Posts:** 250

SubiCarLous wrote:

I found errors in the AVCS Threshold tables (Coolant and Engine Thresholds). The label always says "Disabled Below" and "Disabled Above". Just wanted to mention it, I hope it helps.

Thanks for reporting. I will try to fix it soon.

paintedtrain · **Joined:** Fri Dec 09, 2016 2:55 am **Posts:** 3

Im sure that Im doing something wrong but Ive got the tables reading right in romraider but when I open them in ecuflash any table with psia on it is waaay off like 45 psi off. Ive tried several different versions of ecu flash and several different updated carberry definitions and it still wont work. Any help is appreciated thanks!

terryjr · **Posted:** Fri Dec 09, 2016 4:16 pm

paintedtrain wrote:

Im sure that Im doing something wrong but Ive got the tables reading right in romraider but when I open them in ecuflash any table with psia on it is waaay off like 45 psi off. Ive tried several different versions of ecu flash and several different updated carberry definitions and it still wont work. Any help is appreciated thanks!

make sure you have artizles defs in the ecuflash romdata wrx folder. just stick the hoole unzipped folder in there

paintedtrain · **Joined:** Fri Dec 09, 2016 2:55 am **Posts:** 3

still getting this. should i just manually change every psia setting?

bludgod · **Posted:** Fri Dec 09, 2016 6:08 pm

is it possible your table data is wrong and someone entered it in absolute bar before you started looking at it in relative PSI?

paintedtrain · **Joined:** Fri Dec 09, 2016 2:55 am **Posts:** 3

im using fastblueufos usdm stage 2 map and the psi values all look fine in romraider for editing which makes me think its something im doing wrong in ecu flash. i re downloaded and set up everything and it does the same thing.

im using artizles ecuflash definitions but im just going to change it manually i guess.

Ralliart4 · **Joined:** Sun Dec 20, 2009 10:08 am **Posts:** 26

I know this may sound stupid as heck but how do I get the definitions to load onto romraider? For the life of me I cant get it to work, I DL the zip and can open the hex file but I cant manage to get to definitions menu to find the Carberry definitions.

Please help... the last time I used romraider/open was when this prodrive gpn flash was just released here and it was an easier process

dschultz · **Posted:** Thu Jan 12, 2017 3:28 pm

Ralliart4 wrote:

I know this may sound stupid as heck but how do I get the definitions to load onto romraider? For the life of me I cant get it to work, I DL the zip and can open the hex file but I cant manage to get to definitions menu to find the Carberry definitions.

Please help... the last time I used romraider/open was when this prodrive gpn flash was just released here and it was an easier process

http://www.romraider.com/Documentation/ ... rFAQ#toc17

Ralliart4 · **Joined:** Sun Dec 20, 2009 10:08 am **Posts:** 26

dschultz wrote:

Ralliart4 wrote:

I know this may sound stupid as heck but how do I get the definitions to load onto romraider? For the life of me I cant get it to work, I DL the zip and can open the hex file but I cant manage to get to definitions menu to find the Carberry definitions.

Please help... the last time I used romraider/open was when this prodrive gpn flash was just released here and it was an easier process

http://www.romraider.com/Documentation/ ... rFAQ#toc17

Is it the .hex file or the .xml file? I was looking for the correct file to add to the definitions but nothing that came in the Zip has worked for me so far.

Once I unzip the packet there is:
- Carberry rom patch
- CarberryROM-Base ignition xml
- CarberryROM-rev4.2LOAD xml
- CarberryROM-rev4.2MAP xml

- Speed Density Base.hex

dschultz · **Posted:** Fri Jan 13, 2017 2:26 pm

Definitions are provided as XML files as indicated in the FAQ topic. When adding definitions with the Definition Manager files are filtered on .xml so you can't choose any other file type without changing the filter.
Hex or bin files are the ROM dump or "tune" files to be modified and reflashed.

RichardSon · **Joined:** Fri Jan 08, 2016 3:04 pm **Posts:** 30

Hi guys, can someone explain me what i am doing wrong ?

When i want to look at the learning view of my carberry rom in romraider with SDlogger-rev1.8.xml definition file it shows me this :

jon7009 · **Posted:** Wed Mar 29, 2017 3:28 pm

I use a separate program for that on this rom

http://www.romraider.com/forum/viewtopic.php?t=7397

RichardSon · **Joined:** Fri Jan 08, 2016 3:04 pm **Posts:** 30

Yes separate program works...

But i am very interested what is cause of that error ?

RomRaider

Forum rules

CarBerry ROM - EcuFlash Definitions

Who is online