RomRaider Logo

RomRaider

Open Source ECU Tools
 FAQ •  Register •  Login 

RomRaider

Documentation

Community

Developers

It is currently Sat Feb 21, 2026 2:46 pm

All times are UTC





Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Knocking Problem
PostPosted: Sun Mar 12, 2023 12:46 pm 
Offline
Newbie

Joined: Sun Jan 31, 2021 4:14 pm
Posts: 6
hello everyone i have a 2003 fxt and i am working on carberry rom which i am sharing with you here. Between 2000 and 3000 rpm I get knocks in the range of -0.50 and -3.00. I'm waiting for your help.


Attachments:
carberry.rar [65.72 KiB]
Downloaded 35 times
Top
 Profile  
 
 Post subject: Re: Knocking Problem
PostPosted: Thu Mar 16, 2023 3:43 pm 
Offline
Moderator
User avatar

Joined: Sat Jul 06, 2013 12:55 pm
Posts: 3297
Location: NI
you'd also need a log file and LTV info to look at - plus the full list of mods on the car, what fuel you run and whereabouts in the world you are.

But for a guesswork answer you either have actual knock and you need to pull timing or you have false knock generated by something rattling in the engine bay. Det cans and some investigative work will give you the answer :)

_________________

Good luck and may the logs be ever in your favour!


Top
 Profile  
 
 Post subject: Re: Knocking Problem
PostPosted: Sat Mar 18, 2023 2:51 pm 
Offline
Newbie

Joined: Sun Jan 31, 2021 4:14 pm
Posts: 6
this is log file


Attachments:
LOG.csv [816.68 KiB]
Downloaded 42 times
Top
 Profile  
 
 Post subject: Re: Knocking Problem
PostPosted: Sat Mar 18, 2023 3:13 pm 
Offline
Moderator
User avatar

Joined: Sat Jul 06, 2013 12:55 pm
Posts: 3297
Location: NI
your log is lacking useful items, like manifold pressure, CL/OL status, final fuel base, injector duty, ignition total timing, a/f correction, a/f learning, VE, engine speed, throttle position, gear, vehicle speed etc.

really, you've logged 6 things and its just not enough to look at your timing table and see where you are on the table to get half an idea of whats going on.

What you can see at least is your IAM is 1 - so the car is in limp mode basically and still trying to pull 5 degrees on you.

Some items to check:
is the engine broken - compression/leakdown all good?
is there anything in the engine bay rattling that the knock sensor could be picking up?
is the knock sensor even attached to the harness/engine?
do you actually have 470cc injectors fitted or is this compensating for something?
does the car run ok on the original MAF based tune?
have you tried reducing timing a lot and also maybe smoothing your timing table out?


run through some basic checks first I think and then try some tuning work if everything checks out.

_________________

Good luck and may the logs be ever in your favour!


Top
 Profile  
 
 Post subject: Re: Knocking Problem
PostPosted: Sat Mar 18, 2023 6:47 pm 
Offline
Newbie

Joined: Sun Jan 31, 2021 4:14 pm
Posts: 6
I live in Turkey, I use 95 octane gasoline. My vehicle's knock sensor, spark plugs and front oxygen sensor have just been replaced with original parts. However, the knocking problem persists. There are knocks at low revs and engine temperature from 80 C degrees. No knocking at high revs. The last log file I saved


Attachments:
log.csv [594.23 KiB]
Downloaded 39 times
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style based on FI Subsilver by phpBBservice.nl