RomRaider

Following Jason's advice I opened a new thread and hope that you can help me out guys.
I have just finished building my rally car to Group N specifications. It's a 03 EDM STI converted to 06 spec (headlights, bonnet, bumpers, front fenders, etc).
First race is planned in two weeks and will be a hill climb, so the ideal occasion for testing.
I need your help in setting up the base map. Here's the ROM from my car.
I want to thank everybody in advance for their time and valuable knownledge.
Calin

First of all, you will upload large log of your car for building of SD multiplier, offset and SD compensation map.

What is so different about your engine setup compared to other Group N Subarus?

I would start with the rom as is and see how it looks since it was setup specifically for group N cars

here's my rom, still needs lots of work and I believe my offset was wrong when I tuned it so I will have to look at it again once I fix the gearbox
car has 32mm restrictor with cams enabled dialed for 98RON pump gas

Hi Guys,
I've been away the last week. I was all caught up in finishing the last details for the race. As I knew very little about the car I decided to go into the race as opening car (which does not count in any standings) so it was all about testing the car and see what needs to be fixed/upgraded.
So I went into the race with the stock rom and in fact everything else.
I must say I was delighted with the weekend as I managed to get fairly close to the top times in group N. Best time was 2'13" and my best time was 2'23".
So now I'm ready for the real thing.
For those of you who are curious I have attached some photos with the car.

@lukesky_wrx
Do you mean I should flash the rom as it is and see how it works?

@mrf582
The current engine setup is a EDM 2.0 turbo stock engine with no mods.
What I'm planning is to upgrade to a spec C short block, spec C intake along with the VF36 twin scroll which is currently homologated for the N12.