RomRaider
https://mailserver.romraider.com/forum/

MerpMod Switch/flexfuel version needed by anyone ?
https://mailserver.romraider.com/forum/viewtopic.php?f=37&t=14020		 Page 1 of 41
Author:  andea79 [ Thu Aug 17, 2017 12:24 pm ]
Post subject:  MerpMod Switch/flexfuel version needed by anyone ?
LATEST BUILDS ATTACHED TO THIS POST

*For the ones wanting to use MerpMod versions on cars that are not defined below (or in other threads) or just want to flash roms with different IDs I have observed the following:

1. if you compare 2 roms and they have the same content between 000000 and 002000 you can flash/use any one
(examples AZ1G201G, Z1G20000, AZ1J500G, AZ1G700K, AZ1L100G, AZ1L100K)

2. for 2008+ if you compare the roms and they have the same content between 000000 and 002000 EXCEPT the area between 000FF8 and 001000 you can edit the rom you want to use - just put the same content from your rom 000FF8 - 001000 to the rom you want to use and you can flash it (I used for example an EDM 2008 STI rom on a 2011 SADM WRX)

this means that with modifying 000FF8 - 001000 area and proper tuning all 68 roms starting with AZ1 from here viewtopic.php?f=35&t=7591 can be cross flashed
or all 44 roms starting with AE5 can be cross flashed

so you can use AE5IB00V MerpMod patched rom below on any AE5 rom in theory :)

*USE WHAT I WROTE ABOVE AT YOUR OWN RISK , I did several cross flashing tests as described above but I did not test all possible combinations ...

Attachments:
A2ZJE11J_Flex-4.zip [1.38 MiB]
Downloaded 516 times
AZ1G202I-Flex2.zip [1.41 MiB]
Downloaded 1021 times
A8DK100F-2.zip [1.42 MiB]
Downloaded 913 times
File comment: compatible with AE5IB00V, AE5I910V, AE5IB40V
AE5IB00V-Flex.zip [1.54 MiB]
Downloaded 1374 times
A2ZJE11J_Flex-3.zip [1.33 MiB]
Downloaded 1017 times
A8DK100Y-Flex.zip [1.35 MiB]
Downloaded 935 times
A8dk100z.zip [1.35 MiB]
Downloaded 973 times
AZ1G101M-Flex2.zip [1.41 MiB]
Downloaded 849 times
File comment: compatible with AZ1G201G, Z1G20000, AZ1J500G, AZ1G700K, AZ1L100G, AZ1L100K
AZ1G202G_FLEX-5.ZIP [1.42 MiB]
Downloaded 1384 times
A2ZJ710J-Test-8.zip [1.27 MiB]
Downloaded 1281 times
AZ1G900C-Flex.zip [1.41 MiB]
Downloaded 889 times
File comment: compatible with AZ1N100G, AZ1N100M, AZ1P000G, AZ1P000L, AZ1P000M, AZ1Q010M, AZ1S000G
AZ1N100M-Flex.zip [1.45 MiB]
Downloaded 1025 times
AZ1E401A-Flex.zip [1.35 MiB]
Downloaded 947 times
A8DH100F-Flex.zip [1.37 MiB]
Downloaded 1026 times
A2UG000K-Flex.zip [1.38 MiB]
Downloaded 970 times
Author:  welaish [ Thu Aug 17, 2017 1:06 pm ]
Post subject:  Re: MerpMod Switch/flexfuel version needed by anyone ?
I want AZ1G202G and AZ1G700K with 3 maps using Si-drive :)
Author:  andea79 [ Thu Aug 17, 2017 1:20 pm ]
Post subject:  Re: MerpMod Switch/flexfuel version needed by anyone ?
ok :)
can you do a test write of AZ1G202G over AZ1G700K ? just test write ... because I think they may be interchangeable
(at least AZ1G202G with AZ1J500G are)

and changing maps via SI-Drive only ? that would overwrite the SI-Drive functionality... how about clutch+brake+SI-Drive ? I need some other inputs so I know when you want to change maps or just use SI-drive ...
Author:  welaish [ Thu Aug 17, 2017 1:53 pm ]
Post subject:  Re: MerpMod Switch/flexfuel version needed by anyone ?
Flashing 202g over 700K works i have tried it before. so you recommend that instead of using the original ROM?

its just sometime confusing to use 6 maps and blend them with SI-drive as well.

its quite simple for me have 3 maps only and to change it using the SI-Drive only. is it a problem from operational prospective?
if its quit long process don't waste your time I will just use what I have. as I don't have time now to test because of a work related project.
Author:  bono80kuriks [ Thu Aug 17, 2017 11:23 pm ]
Post subject:  Re: MerpMod Switch/flexfuel version needed by anyone ?
i would love to get it for my 08 usdm wrx: AZ1E401A

I'm in the middle of wiring in a jdm version 8 motor (already did version 8 trans about a year ago) and would love to get FF on the twinscroll setup :-)
Author:  swami [ Fri Aug 18, 2017 1:22 am ]
Post subject:  Re: MerpMod Switch/flexfuel version needed by anyone ?
a version for A2UG000k would be greatly appreciated.
Author:  Sambo88 [ Fri Aug 18, 2017 9:21 pm ]
Post subject:  Re: MerpMod Switch/flexfuel version needed by anyone ?
PLEASE!!!! AZ1G101M! :D :D :D :D

Attachments:
az1g101m 26psi + Def + Base.zip [425.39 KiB]
Downloaded 794 times
Author:  andea79 [ Sat Aug 19, 2017 5:25 am ]
Post subject:  Re: MerpMod Switch/flexfuel version needed by anyone ?
ok, working on the requests so far ... :)
Author:  Makaveli [ Sat Aug 19, 2017 8:17 am ]
Post subject:  Re: MerpMod Switch/flexfuel version needed by anyone ?
andea79 wrote:
ok, working on the requests so far ... :)


Hope you got my pm? AZ1G900C Please :D
Author:  andea79 [ Sun Aug 20, 2017 8:27 am ]
Post subject:  Re: MerpMod Switch/flexfuel version needed by anyone ?
welaish wrote:
I want AZ1G202G and AZ1G700K with 3 maps using Si-drive :)


with Map switch input mode = SI Drive it should work ...

I would use AZ1G202G on AZ1G700K also, in the end the OEM part of the roms is pretty much the same ... I see nothing to lose :)

Attachments:
AZ1G202G-SIDRIVE-3MAPS.zip [1.41 MiB]
Downloaded 856 times
Author:  welaish [ Sun Aug 20, 2017 8:57 am ]
Post subject:  Re: MerpMod Switch/flexfuel version needed by anyone ?
andea79 wrote:
welaish wrote:
I want AZ1G202G and AZ1G700K with 3 maps using Si-drive :)


with Map switch input mode = SI Drive it should work ...

I would use AZ1G202G on AZ1G700K also, in the end the OEM part of the roms is pretty much the same ... I see nothing to lose :)


lovely, I will check it and get back to you. I really appreciate it.

I can see 2 people already downloaded it. its not me only :)
Author:  welaish [ Sun Aug 20, 2017 8:59 am ]
Post subject:  Re: MerpMod Switch/flexfuel version needed by anyone ?
please pass your Paypal.
Author:  andea79 [ Sun Aug 20, 2017 9:03 pm ]
Post subject:  Re: MerpMod Switch/flexfuel version needed by anyone ?
Sambo88 wrote:
PLEASE!!!! AZ1G101M! :D :D :D :D


here you are :)
let me know how testing works ...

Attachments:
AZ1G101M_MerpMod.zip [1.4 MiB]
Downloaded 753 times
Author:  Sambo88 [ Sun Aug 20, 2017 9:06 pm ]
Post subject:  Re: MerpMod Switch/flexfuel version needed by anyone ?
andea79 wrote:
Sambo88 wrote:
PLEASE!!!! AZ1G101M! :D :D :D :D


here you are :)
let me know how testing works ...


YES! Will test today and report! Cheers!
Author:  throttlehappy [ Mon Aug 21, 2017 12:27 am ]
Post subject:  Re: MerpMod Switch/flexfuel version needed by anyone ?
Sambo88 wrote:
andea79 wrote:
Sambo88 wrote:
PLEASE!!!! AZ1G101M! :D :D :D :D


here you are :)
let me know how testing works ...


YES! Will test today and report! Cheers!


Does your LC/FFS disable after using Cruise Control on old patched ROM? If so, dont use it if you want the other patch to work after using Cruise Control
Page 1 of 41 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/