it's not about donations - it never was, it's just lack of time in this period, porting MerpMod to another rom requires at least 6-8 hours and for the moment I don't have that ... hopefully better times will come
| RomRaider https://mailserver.romraider.com/forum/ |
|
| Problem reading A8DH2MMZ https://mailserver.romraider.com/forum/viewtopic.php?f=37&t=17154 |
Page 1 of 1 |
| Author: | artec12 [ Fri May 15, 2020 2:03 pm ] |
| Post subject: | Problem reading A8DH2MMZ |
Hello, I am trying to modify a Speed Density 32-bit 06 EDM ECU from a 2006 Hawkeye RB320 model. I know those came out with PPP Ecutek modified ECU but this has been tuned by someone else and I was able to read the file with Ecuflash so I asume it's no longer Ecutek. The problem is that the ECU software version is unknown. After viewing address 0x2000 with a hex editor and converting it to ASCII I was able to see that the version is A8DH2MMZ. I have tried searching with no luck. I also tried using the A8DH200Z definitions and I was able to read a few maps but no speed density maps appeared with the MerpMod A8DH200Z definitions so I assume either its not MerpMod patched or the A8DH200Z are different to the unknown A8DH2MMZ. I have attached the read file. Any ideas? Have you ever come across to such version? Moderator: ROM removed. Please read posting rules before submitting ROMs or maps. |
|
| Author: | andea79 [ Sun May 17, 2020 4:56 pm ] |
| Post subject: | Re: Problem reading A8DH2MMZ |
it is MerpMod but there are several compiled versions and you have to have the right definitions for it -> can you PM the rom ? |
|
| Author: | andea79 [ Sun May 17, 2020 5:28 pm ] |
| Post subject: | Re: Problem reading A8DH2MMZ |
you can also search "MerpMod" as a string in the rom and you should find a string like "A8DK100Z.MeRpMoD.Flash.Testing.v14.11.11.2024" that's your full MerpMod ID |
|
| Author: | petergc8 [ Mon May 18, 2020 7:17 am ] |
| Post subject: | Re: Problem reading A8DH2MMZ |
andea79 wrote: you can also search "MerpMod" as a string in the rom and you should find a string like "A8DK100Z.MeRpMoD.Flash.Testing.v14.11.11.2024" that's your full MerpMod ID Hello, have you abandoned the continuity of flex developments? is there a possibility of a motivational donation to a merp AE5IA10L USDM WRX 11? |
|
| Author: | andea79 [ Mon May 18, 2020 3:02 pm ] |
| Post subject: | Re: Problem reading A8DH2MMZ |
it's not about donations - it never was, it's just lack of time in this period, porting MerpMod to another rom requires at least 6-8 hours and for the moment I don't have that ... hopefully better times will come
|
|
| Author: | petergc8 [ Mon May 18, 2020 7:20 pm ] |
| Post subject: | Re: Problem reading A8DH2MMZ |
andea79 wrote: it's not about donations - it never was, it's just lack of time in this period, porting MerpMod to another rom requires at least 6-8 hours and for the moment I don't have that ... hopefully better times will come Thanks for responding, please excuse me if my donation comment was ugly, that was not the intention in that case you could have some tip or advice to be able to create the patch, I believe that I am close to the objective but my hell is in the part of the directions and references I think that I cannot interpret them very well I will tell you a brief review of what I have With XMLtoIDC I have created table scripts that I open in IDA pro, then some names appear where I imagine it is the beginning of the code and the tables So when I get this, are those the addresses that I should put in HEW at the moment I am porting the patch to a new ROM? How can I identify the exact address that I must indicate in hew when making the patch? |
|
| Author: | andea79 [ Tue May 19, 2020 7:50 am ] |
| Post subject: | Re: Problem reading A8DH2MMZ |
That's exactly the part that requires the most time - finding the addresses in IDA - and that's also the part where you won't find any step by step tutorial because there is nothing standard about it - it varies from rom to rom and person to person It may help you if you take another rom (or more roms) that already has the required addresses defined, open all in IDA and find similarities between the known rom/address and your rom (searching pieces of code that surround the known address or the references to that address ). It's not an exact procedure and obviously there's risk and maybe errors sometimes ... |
|
| Author: | petergc8 [ Tue May 19, 2020 11:45 pm ] |
| Post subject: | Re: Problem reading A8DH2MMZ |
andea79 wrote: That's exactly the part that requires the most time - finding the addresses in IDA - and that's also the part where you won't find any step by step tutorial because there is nothing standard about it - it varies from rom to rom and person to person It may help you if you take another rom (or more roms) that already has the required addresses defined, open all in IDA and find similarities between the known rom/address and your rom (searching pieces of code that surround the known address or the references to that address ). It's not an exact procedure and obviously there's risk and maybe errors sometimes ... Well I think I have reached a wall so if that is the case maybe we are not all lucky, thank you very much |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|