| RomRaider https://mailserver.romraider.com/forum/ |
|
| Ez30 Merpmod Porting https://mailserver.romraider.com/forum/viewtopic.php?f=37&t=17661 |
Page 1 of 1 |
| Author: | mrdohca [ Sat Oct 03, 2020 4:57 am ] | ||||
| Post subject: | Ez30 Merpmod Porting | ||||
Hi, is someone help port this version merpmod from D2WD701C to D2UK001Q. I've attached both files. Many Thanks.
|
|||||
| Author: | The Lorax [ Sat Oct 03, 2020 9:10 am ] |
| Post subject: | Re: Ez30 Merpmod Porting |
herpyderpy wrote: Hi, is someone help port this version merpmod from D2WD701C to D2UK001Q. I've attached both files. Many Thanks. It doesn't quite work that way unfortunately, each ROM has to be analyzed individually (in IDA) and a patch created after all the relevant addresses have been found. |
|
| Author: | mrdohca [ Sun Oct 04, 2020 5:12 am ] |
| Post subject: | Re: Ez30 Merpmod Porting |
Cheers, I'll carry on my search for an ecu that will take the D2WD701C rom image. |
|
| Author: | throttlehappy [ Thu Nov 19, 2020 3:34 am ] |
| Post subject: | Re: Ez30 Merpmod Porting |
herpyderpy wrote: Cheers, I'll carry on my search for an ecu that will take the D2WD701C rom image. It will not work, that ECU is a preface 1Mb ROM with no support for the car you have. |
|
| Author: | mrdohca [ Sun Nov 22, 2020 7:41 am ] |
| Post subject: | Re: Ez30 Merpmod Porting |
There seems to be very limited ez30 ports. I have got my hands on a few later 1mb ecus. Some use sti05 and subarucan flash methods. But that's as far as I've got haha |
|
| Author: | throttlehappy [ Sun Nov 22, 2020 1:18 pm ] |
| Post subject: | Re: Ez30 Merpmod Porting |
You have a 2007-2008 JDM 5EAT H6 What features do you want added would be my question |
|
| Author: | mrdohca [ Sun Nov 22, 2020 4:39 pm ] |
| Post subject: | Re: Ez30 Merpmod Porting |
throttlehappy wrote: You have a 2007-2008 JDM 5EAT H6 What features do you want added would be my question Main thing required is speed density and launch control. I have an Audm D2UJ001T 08 outback ecu to play with as well. I'd love to give it a go but dont have ida pro |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|
