| RomRaider https://mailserver.romraider.com/forum/ |
|
| Merp/aijii CEL flash conditions https://mailserver.romraider.com/forum/viewtopic.php?f=37&t=17833 |
Page 1 of 1 |
| Author: | awfulwaffle [ Sat Nov 21, 2020 10:54 pm ] |
| Post subject: | Merp/aijii CEL flash conditions |
Would anyone be kind enough to clue me in what can trigger CEL flash in merpmod/aijiimod, outside of the failsafes? Started poking around with a Switch map on my car, and seeing a periodic CEL flash. Starts at 3x, but for some reason I can adjust the number of flashes between 1x and 3x by toggling up and down with the cruise control stalk. Don't see anything explicitly noted to trigger this, but maybe I'm missing something. |
|
| Author: | jon7009 [ Sun Nov 22, 2020 1:07 pm ] |
| Post subject: | Re: Merp/aijii CEL flash conditions |
what's your calibration ID? this is a switch testing rom then, and not just gratis? |
|
| Author: | solidxsnake [ Tue Nov 24, 2020 3:26 pm ] |
| Post subject: | Re: Merp/aijii CEL flash conditions |
I ported aijiimod1.4 for A2WC522N for awfulwaffle. Made a mistake in the Test Mode switch detection, which was causing the errors in the first post. That's been fixed, but still unsure if all the other features are working. If they do end up working, I'll start a pull request on ajiimod's GitHub repository for the definitions for this CALID. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|