RomRaider

AE5I910L Patch needed. 2011 WRX Hatch. It looks like there is more attention to this since Cobb went legit. I could use a hand patching AE5I910L. Will buy the beer and pizza.

Thanks

do you have the defs and the stock rom? need it so i can copy over the hex and to compare the roms

it wont let me upload .bin .hex or .srf, how should I load the rom

ah, zipped it

thanks a ton

Sorry i dont know enough yet to make merp mod maps myself or to do region cross flashing. Best thing you can probably do is to get a usdm ecu and the cam sensors i believe and swap over everything you will need immobolizer, key and entire cylinder lock, ecu and gauge cluster to correctly swap for immobolizer its going to be a bit of a project. i think the usdm ecu wont work with au cam sensors idk why.

I have a 2012 sti ecu enroute, was pretty cheap. I was going to try and clone the immobilizer like I did for my 05. They seem to use the same immo chip. I’m going to flash the B00v flex rom with 000FF8 copied over first. As long as that works I guess the ae5I910L dosnt have to be patched.

ok, I ended up using an STI ecu to get the davcs hardware. So I am using a STi patched rom