Fuel pump duty tables

Cbast · **Joined:** Mon Oct 10, 2016 5:19 pm **Posts:** 23

For a2wc412d plzzzz

GADzik · **Joined:** Mon Nov 05, 2012 3:06 pm **Posts:** 2

hi guys, please help me find the address of the fuel tables for A2ZJA00P thanks

cortin · **Posted:** Sat Jun 13, 2020 8:22 am

GADzik wrote:

hi guys, please help me find the address of the fuel tables for A2ZJA00P thanks

#029660

cortin · **Posted:** Sat Jun 13, 2020 8:26 am

Cbast wrote:

For a2wc412d plzzzz

#038A08

Cbast · **Joined:** Mon Oct 10, 2016 5:19 pm **Posts:** 23

wow tanks ur a legend i can change the low and med setting hope my new pump gonna have more voltage at 50% for low setting

trimmer293 · **Joined:** Mon Jul 19, 2021 6:45 pm **Posts:** 4

Hi guys! Please help me find the address of the fuel pump duty tables for A8DK100F. Thanks

cortin · **Posted:** Wed Jul 21, 2021 1:08 pm

trimmer293 wrote:

Hi guys! Please help me find the address of the fuel pump duty tables for A8DK100F. Thanks

03DFBC

Hungjai · **Joined:** Sun Jan 08, 2023 3:25 am **Posts:** 4

Hi
I have been trying to tune the stumble out for the last year since I install DW65 fuel pump in my 05 legacy in the 2600rpm to 3200rpm range. Where exactly do I add the code in the XML file as I do not want to brick the ECU, if this is even possible.

Thank you for solving this issue.

Hungjai · **Joined:** Sun Jan 08, 2023 3:25 am **Posts:** 4

Hi

I added the code to the XML file and I have a few question. With this code, does it create the tables to display the fuel pump duty in ECU Editor or does it only display in EcuFlash. I added the code to the XML file but nothing comes up, as Fuel Pump Duty Experimental and is not expandable in ECUFlash. How Do I go about changing the duty cycle? I'm claiming defeat at this point.

ECU ID: 2F12785206
Internal ID: A2WC510N (I want to run the latest rom being A2WC522N)

Hungjai · **Joined:** Sun Jan 08, 2023 3:25 am **Posts:** 4

dschultz wrote:

lordeldor wrote:

I am struggling a little here. I am looking to update my ecu's xml def in ecuflash so I can edit these parameters. But the xml snippet only calls for one address. Which address should that be for my ecu?

This is an example of the XML snippet I added. Which I added directly to my ecu's xml file.

<table name="Fuel Pump Duty" storageaddress="45CB0" />
<table type="2D" name="Fuel Pump Duty" category="Fueling - Injectors" storagetype="float" endian="little" sizey="2" userlevel="2">
<scaling units="Duty %" fineincrement="1" coarseincrement="5" />
<table name="Fuel Pump Duty" type="Static Y Axis" sizey="2">
<data>Medium</data>
<data>Low</data>
</table>
<description>The ECU will set fuel pump duty cycle to 0%, 100%, or one of these two values.</description>
</table>

I tried these three values for storageaddress, and none of them appear to be appropriate:
45CAC
45CB0
45BEA

The new parameter shows up in ecuflash, but when I click to edit the map it does not have any values in the Medium, and Low categories. They are simply blank.

I assume I am missing something here. Any help would be greatly appreciated.

Thank you!

Use the updated 32BITBASE from this post.
Then just add this line to the XML file that EcuFlash uses for your ROM.

Code:

I'm making progress but I'm not sure if it is correct. I see towards the bottom of the file in ECUFlash " ALPHA Fuel Pump" drop down menu "Fuel Pump Duty". Now, when I right click edit, I'm not able to edit. Am I doing something wrong? Is 33.3 and 66.7 enough to get rid of the stumble?
I noticed that in the second code where it says "address", is it supposed to be "storageaddress".
In first and second code where the values of the storageaddress, is it supposed to be the same or exactly written?

Thank you once again.

dschultz · **Posted:** Fri Jan 13, 2023 10:29 pm

EcuFlash and RR Editor definitions use a slightly different syntax, adjust your element names as required for the definition you are editing.

Hungjai · **Joined:** Sun Jan 08, 2023 3:25 am **Posts:** 4

dschultz wrote:

EcuFlash and RR Editor definitions use a slightly different syntax, adjust your element names as required for the definition you are editing.

Thank you, I was able to edit the fuel duty table.

quicksand jesus · **Joined:** Tue May 17, 2011 11:23 am **Posts:** 26

Any chance someone has this for AE5T110V (2016 STI)? I've looked at the 2015's, and it's not compatible.

cortin · **Posted:** Thu Jan 26, 2023 3:24 pm

quicksand jesus wrote:

Any chance someone has this for AE5T110V (2016 STI)? I've looked at the 2015's, and it's not compatible.

Fuel Pump Duty 053D10

Cam_Haug · **Joined:** Sun Aug 20, 2017 1:16 pm **Posts:** 63

Every time I think I'll be able to find these things with Scooby rom I fail

Has anyone defined these for A2UG002T?

Cheers,

Cam

RomRaider

Fuel pump duty tables

Who is online