MFB wrote:
No worries mate, you still did find Requested Torque limit based on Iam condition.
AZ1G101M
AZ1G101N
No IAT table found unless it is 2D
<table name="Requested Torque Limit Max IAM" category="Drive-by-Wire Throttle (DBW)" address="dd404" type="3D" level="1" scaling="RequestedTorque(rawecuvalue)">
<table name="IAM" address="dd3ec" type="X Axis" elements="3" scaling="IgnitionAdvanceMultiplier(IAM)"/>
<table name="Engine Speed" address="dd3f8" type="Y Axis" elements="3" scaling="RPM"/>
</table>
