|
RomRaider
Documentation
Community
Developers
|
| Author |
Message |
|
td-d
|
Post subject: Re: Knock Sensor Calibration, thresholds and noise filter Posted: Sun Jan 10, 2016 10:32 pm |
|
 |
| Moderator |
Joined: Thu May 20, 2010 8:01 am Posts: 3117 Location: Johannesburg, South Africa
|
Ok, A8DK100F - the older roms do not have the 3D tables, incidentally. Code: ROM:000CA7F4 Knock_Detection_Minimum_Engine_Run_Time:
ROM:000CDB09 Filter_Ref_Max_Range_Hysteresis_Corr_Knock_Sen_output_modify
ROM:000CDB9C Background_Noise_Delta_Smoothing_Weighting_Factor_RPM_Delta_Threshold_Imm:.float 80.0 ROM:000CDB9C ; DATA XREF: sub_3A980+2Eo ROM:000CDB9C ; ROM:off_3AB98o ROM:000CDBA0 Background_Noise_Delta_Smoothing_Weighting_Factor_RPM_Delta_Threshold_Short:.float 100.0 ROM:000CDBA0 ; DATA XREF: sub_3A980+38o ROM:000CDBA0 ; ROM:off_3AB9Co ROM:000CDBA4 Background_Noise_Delta_Weighting_Factor_Low_RPM_Delta:.float 0.25 ROM:000CDBA4 ; DATA XREF: sub_3A980:loc_3A9C2o ROM:000CDBA4 ; ROM:off_3ABA0o ROM:000CDBA8 Background_Noise_Base_Smoothing_Factor_High_Rpm_Delta:.float 0.0625 ROM:000CDBA8 ; DATA XREF: sub_3A980:loc_3A9CCo ROM:000CDBA8 ; ROM:off_3ABA8o ROM:000CDBAC Background_Noise_Delta_Weighting_Factor_High_RPM_Delta:.float 0.0625 ROM:000CDBAC ; DATA XREF: sub_3A980+44o ROM:000CDBAC ; ROM:off_3ABA4o ROM:000CDBB0 Background_Noise_Base_Smoothing_Factor_Low_Rpm_Delta:.float 0.02 ROM:000CDBB0 ; DATA XREF: sub_3A980+52o ROM:000CDBB0 ; ROM:off_3ABACo ROM:000CDBB4 Knock_threshhold_Filter_background_noise_interv_weight_factor_RPM_Delta_Short:.float 100.0 ROM:000CDBB4 ; DATA XREF: sub_3A980+70o ROM:000CDBB4 ; ROM:off_3ABC8o ROM:000CDBB8 Knock_threshhold_Filter_background_noise_interv_weight_factor_High_RPM_Delta_Limit_max:.float 0.125 ROM:000CDBB8 ; DATA XREF: sub_3A980+A0o ROM:000CDBB8 ; ROM:off_3ABE0o ROM:000CDBBC Knock_threshhold_Filter_background_noise_interv_weight_factor_High_RPM_Delta_Rpm_delta_ratio:.float 150.0 ROM:000CDBBC ; DATA XREF: sub_3A980+84o ROM:000CDBBC ; ROM:off_3ABD4o ROM:000CDBC0 Knock_threshhold_Filter_Final_Limit_max_modify_pre_final_limit:.float 8.0 ROM:000CDBC0 ; DATA XREF: sub_AD94+328o ROM:000CDBC0 ; sub_AD94:off_B1ECo ROM:000CDBC4 Knock_Threshhold_Level_Final_Limit_Min:.float 50.0 ; DATA XREF: sub_AB6E+56o ROM:000CDBC4 ; ROM:off_AC98o ... ROM:000CDBC8 Knock_Threshhold_Level_Final_Limit_Max:.float 331.0 ROM:000CDBC8 ; DATA XREF: sub_AD94:loc_B23Co ROM:000CDBC8 ; ROM:off_B2B0o ROM:000CDBCC Filter_Noise_Level_Weighting_Factor:.float 2.0 ; DATA XREF: sub_AD94+4C0o ROM:000CDBCC ; ROM:off_B2BCo
ROM:0008C420 Table_Knock_Threshold_Weighting_Factor_RPM:.data.w h'12 ROM:0008C420 ; DATA XREF: sub_AD94+FCo ROM:0008C420 ; sub_AD94:off_AF10o ROM:0008C422 .data.w 0 ROM:0008C424 .data.l flt_CE0A4 ROM:0008C428 .data.l flt_CE0EC ROM:0008C42C Table_Knock_Sensor_Calibration:.data.w h'3A ; DATA XREF: sub_AD94+1EAo ROM:0008C42C ; sub_AD94:off_B19Co ROM:0008C42E .data.w 0 ROM:0008C430 .data.l flt_CE134 ROM:0008C434 .data.l flt_CE21C ROM:0008C438 Table_Knock_threshold_filter_Final_Limit_Min:.data.w h'A ROM:0008C438 ; DATA XREF: sub_AD94+32Co ROM:0008C438 ; sub_AD94:off_B1F0o ROM:0008C43A .data.w 0 ROM:0008C43C .data.l flt_CE304 ROM:0008C440 .data.l flt_CE32C ROM:0008C444 Table_Knock_threshold_filter_Final_Limit_Max_Cyl_1:.data.w h'A ROM:0008C444 ; DATA XREF: ROM:Table_Knock_threshold_filter_Final_Limit_Max_Cylinder_Offseto ROM:0008C446 .data.w 0 ROM:0008C448 .data.l flt_CE354 ROM:0008C44C .data.l flt_CE37C ROM:0008C450 Table_Knock_threshold_filter_Final_Limit_Max_Cyl_2:.data.w h'A ROM:0008C450 ; DATA XREF: ROM:000125D4o ROM:0008C452 .data.w 0 ROM:0008C454 .data.l flt_CE3A4 ROM:0008C458 .data.l flt_CE3CC ROM:0008C45C Table_Knock_threshold_filter_Final_Limit_Max_Cyl_3:.data.w h'A ROM:0008C45C ; DATA XREF: ROM:000125D8o ROM:0008C45E .data.w 0 ROM:0008C460 .data.l flt_CE3F4 ROM:0008C464 .data.l flt_CE41C ROM:0008C468 Table_Knock_threshold_filter_Final_Limit_Max_Cyl_4:.data.w h'A ROM:0008C468 ; DATA XREF: ROM:000125DCo ROM:0008C46A .data.w 0 ROM:0008C46C .data.l flt_CE444 ROM:0008C470 .data.l flt_CE46C
ROM:0008C3C8 Table_Knock_Threshold_Filter_Background_Noise_Interval_Weighting_Factor_Low_RPM_Delta_Base:.data.w 7 ROM:0008C3C8 ; DATA XREF: sub_3A980+5Co ROM:0008C3C8 ; ROM:off_3ABB8o ROM:0008C3CA .data.w h'800 ROM:0008C3CC .data.l flt_CDCF4 ROM:0008C3D0 .data.l word_CDD10 ; = 5.0e-2 ROM:0008C3D4 .float 0.000015258789 ROM:0008C3D8 .float 0.0 ROM:0008C3DC Table_Knock_Threshold_Filter_Background_Noise_Interval_Weighting_Factor_High_RPM_Delta_Base:.data.w 7 ROM:0008C3DC ; DATA XREF: sub_3A980+7Ao ROM:0008C3DC ; ROM:off_3ABCCo ROM:0008C3DE .data.w h'800 ROM:0008C3E0 .data.l flt_CDD20 ROM:0008C3E4 .data.l word_CDD3C ; = 8.299e-2 ROM:0008C3E8 .float 0.000015258789 ROM:0008C3EC .float 0.0
_________________ He who dies with the most gadgets wins.
Please do not PM me - use the email option.
|
|
| Top |
|
 |
|
Pozyatiff
|
Post subject: Re: Knock Sensor Calibration, thresholds and noise filter Posted: Tue Jan 12, 2016 3:02 am |
|
 |
| Newbie |
 |
Joined: Mon Jan 12, 2015 5:15 pm Posts: 30 Location: Tyumen, Russia
|
td-d wrote: Ok, A8DK100F - the older roms do not have the 3D tables, incidentally.
This calibration for A8DK100 P, but I ask calibration for 2007 EDM Subaru Forester XT MT A8DK100 F http://forums.openecu.org/download/file.php?id=1871
_________________ Forester XT SG9 (A8DK100F) stock Short block EJ257, 255 head stock, VF48 Levorg 1.6 STI stock
Last edited by Pozyatiff on Mon Feb 29, 2016 5:17 pm, edited 2 times in total.
|
|
| Top |
|
 |
|
td-d
|
Post subject: Re: Knock Sensor Calibration, thresholds and noise filter Posted: Tue Jan 12, 2016 2:29 pm |
|
 |
| Moderator |
Joined: Thu May 20, 2010 8:01 am Posts: 3117 Location: Johannesburg, South Africa
|
|
Jeesh, I'm doing well here, apologies - I'll pull the address out tonight.
_________________ He who dies with the most gadgets wins.
Please do not PM me - use the email option.
|
|
| Top |
|
 |
|
td-d
|
Post subject: Re: Knock Sensor Calibration, thresholds and noise filter Posted: Thu Jan 14, 2016 10:18 pm |
|
 |
| Moderator |
Joined: Thu May 20, 2010 8:01 am Posts: 3117 Location: Johannesburg, South Africa
|
Right, this time the right rom - A8DK100F Code: Knock_Detection_Minimum_Engine_Run_Time CA8F0 Filter_Ref_Max_Range_Hysteresis_Corr_Knock_Sen_output_modify CDC05 Background_Noise_Delta_Smoothing_Weighting_Factor_RPM_Delta_Threshold_Imm CDC98 Background_Noise_Delta_Smoothing_Weighting_Factor_RPM_Delta_Threshold_Short CDC9C Background_Noise_Delta_Weighting_Factor_Low_RPM_Delta CDCA0 Background_Noise_Base_Smoothing_Factor_High_Rpm_Delta CDCA4 Background_Noise_Delta_Weighting_Factor_High_RPM_Delta CDCA8 Background_Noise_Base_Smoothing_Factor_Low_Rpm_Delta CDCAC Knock_threshhold_Filter_background_noise_interv_weight_factor_RPM_Delta_Short CDCB0 Knock_threshhold_Filter_background_noise_interv_weight_factor_High_RPM_Delta_Limit_max CDCB4 Knock_threshhold_Filter_background_noise_interv_weight_factor_High_RPM_Delta_Rpm_delta_ratio CDCB8 Knock_threshhold_Filter_Final_Limit_max_modify_pre_final_limit CDCBC Knock_Threshhold_Level_Final_Limit_Min CDCC0 Knock_Threshhold_Level_Final_Limit_Max CDCC4 Filter_Noise_Level_Weighting_Factor CDCC8
ROM:0008C3C0 Table_Knock_threshold_filter_Background_Noise_interval_Weighting_Factor_Low_RPM_Delta:.data.w 7 ROM:0008C3C2 .data.w h'800 ROM:0008C3C4 .data.l flt_CDDF0 ROM:0008C3C8 .data.l word_CDE0C ; = 5.0e-2 ROM:0008C3CC .float 0.000015258789 ROM:0008C3D0 .float 0.0 ROM:0008C418 Table_Knock_Threshold_Weighting_Factor_RPM:.data.w h'12 ROM:0008C41A .data.w 0 ROM:0008C41C .data.l flt_CE1A0 ROM:0008C420 .data.l flt_CE1E8 ROM:0008C424 Table_Knock_Sensor_Calibration:.data.w h'3A ; ROM:0008C426 .data.w 0 ROM:0008C428 .data.l flt_CE230 ROM:0008C42C .data.l flt_CE318 ROM:0008C430 Table_Knock_threshold_filter_Final_Limit_Min:.data.w h'A ROM:0008C432 .data.w 0 ROM:0008C434 .data.l flt_CE400 ROM:0008C438 .data.l flt_CE428 ROM:0008C43C Table_Knock_threshold_filter_Final_Limit_Max_Cyl_1:.data.w h'A ROM:0008C43E .data.w 0 ROM:0008C440 .data.l flt_CE450 ROM:0008C444 .data.l flt_CE478 ROM:0008C448 Table_Knock_threshold_filter_Final_Limit_Max_Cyl_2:.data.w h'A ROM:0008C44A .data.w 0 ROM:0008C44C .data.l flt_CE4A0 ROM:0008C450 .data.l flt_CE4C8 ROM:0008C454 Table_Knock_threshold_filter_Final_Limit_Max_Cyl_3:.data.w h'A ROM:0008C456 .data.w 0 ROM:0008C458 .data.l flt_CE4F0 ROM:0008C45C .data.l flt_CE518 ROM:0008C460 Table_Knock_threshold_filter_Final_Limit_Max_Cyl_4:.data.w h'A ROM:0008C462 .data.w 0 ROM:0008C464 .data.l flt_CE540 ROM:0008C468 .data.l flt_CE568
_________________ He who dies with the most gadgets wins.
Please do not PM me - use the email option.
|
|
| Top |
|
 |
|
Pozyatiff
|
Post subject: Re: Knock Sensor Calibration, thresholds and noise filter Posted: Mon Feb 29, 2016 5:18 pm |
|
 |
| Newbie |
 |
Joined: Mon Jan 12, 2015 5:15 pm Posts: 30 Location: Tyumen, Russia
|
td-d wrote: Right, this time the right rom - A8DK100F
Thank you!!! It's really for A8DK100F 
_________________ Forester XT SG9 (A8DK100F) stock Short block EJ257, 255 head stock, VF48 Levorg 1.6 STI stock
|
|
| Top |
|
 |
|
SubiCarLous
|
Post subject: Re: Knock Sensor Calibration, thresholds and noise filter Posted: Tue May 31, 2016 8:14 pm |
|
 |
| Newbie |
Joined: Mon Sep 22, 2014 3:41 pm Posts: 40
|
|
Can someone provide the tables for the 16 bit A4RN300G (EDM STI 05) Rom please?
|
|
| Top |
|
 |
|
Walkerrf
|
Post subject: Re: Knock Sensor Calibration, thresholds and noise filter Posted: Wed Aug 10, 2016 4:38 am |
|
 |
| Newbie |
Joined: Wed Jun 29, 2016 11:04 am Posts: 1
|
|
Could someone define these for D2UH003R and D0XJ002B?
|
|
| Top |
|
 |
|
alex.gt25
|
Post subject: Re: Knock Sensor Calibration, thresholds and noise filter Posted: Sun Feb 05, 2017 3:29 pm |
|
 |
| Newbie |
Joined: Sat Jan 28, 2017 1:06 pm Posts: 4
|
|
Hi guys! I've got address for Knock_Sensor_Calibration (A8DH200Z):
<table name="Knock_Sensor_Calibration" category="Knock Sensor" address="cc67c" type="2D" level="1" scaling="rawecuvalue"> <table name="Volts" address="cc594" type="X Axis" elements="58" scaling="rawecuvalue"/> </table>
But I can not get other addresses! Could someone define calibration for A8DH200Z? Can you help me?
You do not have the required permissions to view the files attached to this post.
|
|
| Top |
|
 |
|
alex.gt25
|
Post subject: Re: Knock Sensor Calibration, thresholds and noise filter Posted: Mon Feb 06, 2017 1:32 pm |
|
 |
| Newbie |
Joined: Sat Jan 28, 2017 1:06 pm Posts: 4
|
|
For A8DH200Z:
<table name="Knock_Sensor_Calibration" category="Knock Sensor" address="cc67c" type="2D" level="1" scaling="rawecuvalue"> <table name="Volts" address="cc594" type="X Axis" elements="58" scaling="rawecuvalue"/> </table> <table name="Knock_threshold_filter_Final_Limit_Min" category="Knock Sensor" address="CC764" type="2D" level="1" scaling="Knock"> <table name="Volts" address="CC78C" type="X Axis" elements="10" scaling="RPM"/> </table> <table name="Knock_threshold_filter_Final_Limit_Max_Cyl_1 " category="Knock Sensor" address="CC7B4" type="2D" level="1" scaling="Knock"> <table name="Volts" address="CC7DC" type="X Axis" elements="10" scaling="RPM"/> </table> <table name="Knock_threshold_filter_Final_Limit_Max_Cyl_2 " category="Knock Sensor" address="CC804" type="2D" level="1" scaling="Knock"> <table name="Volts" address="CC82C" type="X Axis" elements="10" scaling="RPM"/> </table> <table name="Knock_threshold_filter_Final_Limit_Max_Cyl_3 " category="Knock Sensor" address="CC854" type="2D" level="1" scaling="Knock"> <table name="Volts" address="CC87C" type="X Axis" elements="10" scaling="RPM"/> </table> <table name="Knock_threshold_filter_Final_Limit_Max_Cyl_4 " category="Knock Sensor" address="CC8A4" type="2D" level="1" scaling="Knock"> <table name="Volts" address="CC8CC" type="X Axis" elements="10" scaling="RPM"/> </table> <table name="Knock_threshold_filter_Final_Limit_Min" category="Knock Sensor" address="CC764" type="2D" level="1" scaling="Knock"> <table name="Volts" address="CC78C" type="X Axis" elements="10" scaling="RPM"/> </table> <table name="Background_Noise_Delta_Smoothing_Weighting_F actor_RPM_Delta_Threshold_Imm" category="Knock Sensor" address="CBFDC" type="1D" level="1" scaling="Knock"/> <table name="Background_Noise_Delta_Smoothing_Weighting_F actor_RPM_Delta_Threshold_Short" category="Knock Sensor" address="CBFE0" type="1D" level="1" scaling="Knock"/> <table name="Background_Noise_Delta_Weighting_Factor_Low_ RPM_Delta" category="Knock Sensor" address="CBFE8" type="1D" level="1" scaling="Knock"/> <table name="Background_Noise_Base_Smoothing_Factor_High_ Rpm_Delta" category="Knock Sensor" address="CBFE4" type="1D" level="1" scaling="Knock"/> <table name="Background_Noise_Delta_Weighting_Factor_High _RPM_Delta" category="Knock Sensor" address="CBFF0" type="1D" level="1" scaling="Knock"/> <table name="Background_Noise_Base_Smoothing_Factor_Low_R pm_Delta" category="Knock Sensor" address="CBFEC" type="1D" level="1" scaling="Knock"/> <table name="Knock_threshhold_Filter_background_noise_int erv_weight_factor_RPM_Delta_Short" category="Knock Sensor" address="CBFF4" type="1D" level="1" scaling="Knock"/> <table name="Knock_threshhold_Filter_background_noise_int erv_weight_factor_High_RPM_Delta_Limit_max" category="Knock Sensor" address="CBFF8" type="1D" level="1" scaling="Knock"/> <table name="Knock_threshhold_Filter_background_noise_int erv_weight_factor_High_RPM_Delta_Rpm_delta_ratio" category="Knock Sensor" address="CBFFC" type="1D" level="1" scaling="Knock"/> <table name="Knock_threshhold_Filter_Final_Limit_max_modi fy_pre_final_limit" category="Knock Sensor" address="CC000" type="1D" level="1" scaling="Knock"/> <table name="Knock_Threshhold_Level_Final_Limit_Min" category="Knock Sensor" address="CC004" type="1D" level="1" scaling="Knock"/> <table name="Knock_Threshhold_Level_Final_Limit_Max" category="Knock Sensor" address="CC008" type="1D" level="1" scaling="Knock"/> <table name="Filter_Noise_Level_Weighting_Factor" category="Knock Sensor" address="CC00C" type="1D" level="1" scaling="Knock"/> <table name="Knock_threshold_filter_Background_Noise_inte rval_Weighting_Factor_Low_RPM_Delta" category="Knock Sensor" address="CC138" type="2D" level="1" scaling="Knock4"> <table name="Volts" address="CC11C" type="X Axis" elements="7" scaling="RPM"/> </table>
|
|
| Top |
|
 |
|
alex.gt25
|
Post subject: Re: Knock Sensor Calibration, thresholds and noise filter Posted: Mon Feb 06, 2017 1:34 pm |
|
 |
| Newbie |
Joined: Sat Jan 28, 2017 1:06 pm Posts: 4
|
But i don't know adresses for: Knock_threshold_weight_factor_RPM_Load_Cyl_1 Knock_threshold_weight_factor_RPM_Load_Cyl_2 Knock_threshold_weight_factor_RPM_Load_Cyl_3 Knock_threshold_weight_factor_RPM_Load_Cyl_4 According this: https://cobbtuning.zendesk.com/hc/en-us ... ed-Pistonsit is the main maps that need to be corrected.
|
|
| Top |
|
 |
|
td-d
|
Post subject: Re: Knock Sensor Calibration, thresholds and noise filter Posted: Mon Feb 06, 2017 3:00 pm |
|
 |
| Moderator |
Joined: Thu May 20, 2010 8:01 am Posts: 3117 Location: Johannesburg, South Africa
|
Code: ROM:0007CD64 Table_Knock_Threshold_Weighting_Factor_RPM:.data.w h'12 ROM:0007CD64 ; DATA XREF: sub_AA14+FCo ROM:0007CD64 ; sub_AA14:off_AB90o ROM:0007CD66 .data.w 0 ROM:0007CD68 .data.l flt_CC504 ROM:0007CD6C .data.l flt_CC54C See my post above - the older roms do not have those per cylinder 3D tables.
_________________ He who dies with the most gadgets wins.
Please do not PM me - use the email option.
|
|
| Top |
|
 |
|
alex.gt25
|
Post subject: Re: Knock Sensor Calibration, thresholds and noise filter Posted: Mon Feb 06, 2017 5:28 pm |
|
 |
| Newbie |
Joined: Sat Jan 28, 2017 1:06 pm Posts: 4
|
|
O, thanks! I missed this. As a result, must I correct only the tables?:
Knock_threshold_filter_Final_Limit_Max_Cyl_1 Knock_threshold_filter_Final_Limit_Max_Cyl_2 Knock_threshold_filter_Final_Limit_Max_Cyl_3 Knock_threshold_filter_Final_Limit_Max_Cyl_1 Knock_Threshhold_Level_Final_Limit_Max
for "Knock Desensitizing For Engine With Forged Pistons" or the other tables?
|
|
| Top |
|
 |
|
td-d
|
Post subject: Re: Knock Sensor Calibration, thresholds and noise filter Posted: Mon Feb 06, 2017 5:52 pm |
|
 |
| Moderator |
Joined: Thu May 20, 2010 8:01 am Posts: 3117 Location: Johannesburg, South Africa
|
|
I haven't used these tables - but from the COBB article it looks like the table to change is the weighting factor - in these older roms, there's only the one (that I posted below). Follow the same procedure, and don't forget to bump up the limit.
_________________ He who dies with the most gadgets wins.
Please do not PM me - use the email option.
|
|
| Top |
|
 |
|
mtnbikeman123
|
Post subject: Re: Knock Sensor Calibration, thresholds and noise filter Posted: Sun Apr 30, 2017 8:21 pm |
|
 |
| Newbie |
Joined: Fri May 01, 2015 5:28 pm Posts: 4
|
|
Can I request this for A2TB001N? Thanks!
|
|
| Top |
|
 |
|
daneskeete
|
Post subject: Re: Knock Sensor Calibration, thresholds and noise filter Posted: Sun Jan 14, 2018 4:16 pm |
|
 |
| Newbie |
Joined: Thu Jan 04, 2018 2:40 pm Posts: 1
|
|
Also requesting the below tables for AZ1G202G:
Knock_threshold_filter_Final_Limit_Max_Cyl_1 Knock_threshold_filter_Final_Limit_Max_Cyl_2 Knock_threshold_filter_Final_Limit_Max_Cyl_3 Knock_threshold_filter_Final_Limit_Max_Cyl_1 Knock_Threshhold_Level_Final_Limit_Max
Thanks
|
|
| Top |
|
 |
Who is online |
Users browsing this forum: No registered users and 8 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|