cortin wrote:
danci1973 wrote:
I'd like to join in on this fun.
I'd like to change the lower cruise control limit as I'd like to avoid speed traps in (many) 30 km/h zones (and now my cruise only works above ~40).
May I please ask for cruise control speed limiting tables definitions for
4B4A384007, CAL ID D2UH001L? Existing definition XMLs are posted
here.
Code:
ROM:000C17AC .float 37.0
ROM:000C17B0 .float 60.0
ROM:000C17B4 .float 250.0
ROM:000C17B8 .float 107.0
Thank you very much, I hope I can try it out this weekend.
I tried it out today, but unfortunately, it doesn't work quite as expected.
<roms>
<rom base="32BITBASE">
<romid>
<xmlid>D2UH001L</xmlid>
<internalidaddress>2000</internalidaddress>
<internalidstring>D2UH001L</internalidstring>
<ecuid>4B4A384007</ecuid>
<year>07</year>
<market>EDM</market>
<make>Subaru</make>
<model>Legacy</model>
<submodel>3.0R</submodel>
<transmission>MT</transmission>
<memmodel>SH7058</memmodel>
<flashmethod>subarucan</flashmethod>
<filesize>1024kb</filesize>
</romid>
...
...
<table name="Cruise_Control_Speed_Limit_Max_A" storageaddress="0xC17B4" />
<table name="Cruise_Control_Speed_Limit_Min_A" storageaddress="0xC17AC" />
<table name="Cruise_Control_Speed_Limit_Max_B" storageaddress="0xC17B8" />
<table name="Cruise_Control_Speed_Limit_Min_B" storageaddress="0xC17B0" />
</rom>
<rom>
<romid>
<xmlid>32BITBASE</xmlid>
<market>USDM</market>
<make>Subaru</make>
<model>Impreza</model>
<submodel>WRX</submodel>
<transmission>MT</transmission>
<filesize>1024kb</filesize>
<memmodel>SH7058</memmodel>
<flashmethod>subarucan</flashmethod>
</romid>
...
...
<table type="2D" name="Cruise_Control_Speed_Limit_Min_A" category="ALPHA Cruise Control" storagetype="float" endian="little" sizey="1" userlevel="1">
<scaling units="Vehicle Speed (KPH)" expression="x" to_byte="x" format="#" fineincrement="1" coarseincrement="5" />
<table type="Static Y Axis" name="Cruise_Control_Speed_Limit_Min_A" sizey="1">
<data>Low Limit A</data>
</table>
<description>Minimum Engagement Speed A</description>
</table>
<table type="2D" name="Cruise_Control_Speed_Limit_Min_B" category="ALPHA Cruise Control" storagetype="float" endian="little" sizey="1" userlevel="1">
<scaling units="Vehicle Speed (KPH)" expression="x" to_byte="x" format="#" fineincrement="1" coarseincrement="5" />
<table type="Static Y Axis" name="Cruise_Control_Speed_Limit_Min_B" sizey="1">
<data>Low Limit B</data>
</table>
<description>Minimum Engagement Speed B</description>
</table>
<table type="2D" name="Cruise_Control_Speed_Limit_Max_A" category="ALPHA Cruise Control" storagetype="float" endian="little" sizey="1" userlevel="1">
<scaling units="Vehicle Speed (KPH)" expression="x" to_byte="x" format="#" fineincrement="1" coarseincrement="5" />
<table type="Static Y Axis" name="Cruise_Control_Speed_Limit_Max_A" sizey="1">
<data>High Limit A</data>
</table>
<description>Maximum Engagement Speed B</description>
</table>
<table type="2D" name="Cruise_Control_Speed_Limit_Max_B" category="ALPHA Cruise Control" storagetype="float" endian="little" sizey="1" userlevel="1">
<scaling units="Vehicle Speed (KPH)" expression="x" to_byte="x" format="#" fineincrement="1" coarseincrement="5" />
<table type="Static Y Axis" name="Cruise_Control_Speed_Limit_Max_B" sizey="1">
<data>High Limit B</data>
</table>
<description>Maximum Engagement Speed B</description>
</table>
from 37 to 22 and it did have an effect, but the lowest speed CC would activate is 33 km/h (which is better than before but not quite what I was hoping for). The moment speed falls bellow 33, CC gets cancelled.
and I set both A and B to 20, but to no avail - it still clunks out at 32.
