marten wrote:
ckibue wrote:
The rear end of the board has 2 jumper wires and two wires from the 16 position Map_sel switch soldered on. One jumper connects B134 Pin 4 to B135 Pin 17 and the other connects B135 pin 12 to B136 Pin 13. The Map_Sel switch black wire is connected to Grnd at B136 Pin 6 whereas the White wire is connected to B135 Pin 24. This is with reference to the 2009 USDM STi Workshop Manual which has several ecu-pinouts matching the JDM version.
Anyone have a complete copy of the 2009 JDM Ecu-pinouts and / or wiring diagram?
Here, ECU pinouts and pin-assigns for 2009 JDM GRB(AZ1G300F).
Looking at those pinouts is missing the pinout for the Manifold Intake air temp sensor for the JDM.
I’m trying to swap my EDM ECU with a GRB JDM ecu but I’m missing the pinouts.
