RomRaider

I am having issues with a project that has a Subaru B4 TT motor and a Denso ECU.
1X Denso
11622AG444
112200-0988

I have looked in the ECU compatibility for the CPU I have with no luck. In fact none of the supported ECUs look to have a similar number.

In the first instance I want to use RomRaider to assist in debugging what is happening when I try to start the engine. Is this a valid way to fault find the issue I have?

Any suggestions welcome.

I believe the motor to ba a JDM 2002 or 2003 GT.

Thanks
Glen

have you tried to connect to the car with ECUflash to download the current map from it? It should be similar to the existing legacy roms so might just be a matter of updating to a compatible software or waiting for someone to fire some definitions together for your version.

Thanks for the idea
I don't have the interface to down load the maps,
My initial question was to confirm support for the Denso ECU.

Do you know if there are members based in Adelaide that may be able to assist.

Are there people that have test rigs, to test the ECU?

I have gone back to basics, with my fault finding. the bottom line is no ignition or injector pulses.
With my tester there are no error codes.

It almost seems like an input that is now unused is not taken hi or low.

Any help welcome.
Glen