GPN 16bit rom and 250% WGDC

JSarv · **Joined:** Sat Mar 01, 2008 10:31 pm **Posts:** 696

Any thoughts? Does not work on any other rom other than the GPN rom.

I can't get max WGDC over 89.9% and have not tried with a max/initial of over 99.9% - in fear that having it over this value may in some way cause problems.

Anyway - my initial and max wgdc can be set to a value as high as 250%..

?

weird..

-Jerod

merchgod · **Joined:** Thu Mar 30, 2006 2:38 am **Posts:** 5336

likely the max wgdc is being compensated by wgdc IAT comp. Remember, that is what those compensation tables do - impact both initial and max wgdc. However, the max wgdc is about 96% anyway (capped - undefined limit), regardless of what you are logging with pwgdc or if you put 200% in the max wgdc table.

JSarv · **Joined:** Sat Mar 01, 2008 10:31 pm **Posts:** 696

Comps were all set to 0 for testing...

merchgod · **Joined:** Thu Mar 30, 2006 2:38 am **Posts:** 5336

Post some logs including td prop, td integ, boost error, pwgdc, rpm, throttle and the current tune

JSarv · **Joined:** Sat Mar 01, 2008 10:31 pm **Posts:** 696

Will do I'm skeptical about my neutral switch being the culprite. I'm in 6 while in any gear and depending on speed 1 through 5 while in neutral.......

rac · **Joined:** Tue Apr 15, 2008 3:11 pm **Posts:** 162

I found while logging my 05 JDM Type RA (MAF based ROM) the WG values don't go over 89.9% as well, no matter what compensations I add/remove

I guess it's specific to JDM roms?..

RomRaider

GPN 16bit rom and 250% WGDC

Who is online