Is uploaded ROM compele? (JDM 2003 Forester AG572-1355)

Sasha_A80 · **Posted:** Sun Jan 17, 2010 6:48 am

I am still trying to extract ROM image from probably the first 32 bit DBW JDM 2002 ecu.

Start is here:
topic1070.html

Could anybody confirm that the following image looks like a real working ROM image?
If this is the case, is there any checksum inside (that usually takes place for DBW ecus)? It does not look so for me...

I have got some probable table definitions from the calibration data got before. They fill the bill for fuel, boost, ignition trimming. I am complete sure I could correct calibrations.

But..

If the ROM image incomplete or some kind of content checking is implemented I probably will loose this ecu (and ability to continue analisys) after BOOT MODE write (the only way I see to download corrected ROM back).

Edit:

0x000000 - 0x00015F locations at ROM image may be incorrect. SSM allows the most of those locations to be rewriten\changed by ecu program (SSM standard parameters).

They may also be covered by RAM remapping to ROM 0x000000-0x001000 or 0x00000-0x002000 regions.

elevenpoint7five · **Posted:** Tue Jan 19, 2010 6:38 pm

Do you know if this has the 7055 or the 7058 processor? I'm not sure if it makes a difference as I haven't done anything with the 7055, but I can load it up sometime this week and take a look at it.

Andy

Sasha_A80 · **Posted:** Tue Jan 19, 2010 7:24 pm

There is SH7055 inside.

The first 8KB of the ROM image are incorrect that means there is no ISR table, bootloader and osloader inside the image.

I hope that 0x002000-0x7FFFF part is correct. I see the calibration table list and corresponding tables. I managed to identified all need ones.

But I am still not sure what ROM parts are to be checksum verified (if any). I would like to recover startup 0x0000-0x1FFF bootloader part if possible.

ayashiko · **Joined:** Wed Jan 05, 2011 12:51 pm **Posts:** 4

help get the IDC file using xmltoidc program.
file A8AK210A

MiSchum · **Posted:** Fri Feb 21, 2014 2:43 am

Very interesting it would be to introduce the LC in A8AK210A This AG572 ecu JDM Forester AT 2002

For those who did swap the MT

Last def ECU for EcuFlash

Attachment:

A8AK210A.zip

Stock rom

Attachment:

AG572_stock_calibrations.zip

GNDEJ205 · **Joined:** Sat Feb 01, 2014 12:41 pm **Posts:** 6

So is the ECU_ID 2A04446305 flashable now? For those of us with the JDM MY02-MY03 Forester Crossport?

SubieWanKenobi · **Joined:** Sun Jan 11, 2015 8:43 pm **Posts:** 2

GNDEJ205 wrote:

So is the ECU_ID 2A04446305 flashable now? For those of us with the JDM MY02-MY03 Forester Crossport?

Does anyone know if this is available now? Thanks!

scientist · **Joined:** Mon Feb 20, 2012 4:32 am **Posts:** 15

guess not

belalegosi · **Joined:** Wed Oct 09, 2013 10:24 pm **Posts:** 11

dokalanyi · **Joined:** Sun Jul 16, 2017 10:35 am **Posts:** 52

Hi all,
Did anyone succeed in reading or writing this ECU?

pappu1 · **Joined:** Fri Aug 14, 2015 9:50 am **Posts:** 2

any updates on this ecu?

RomRaider

Is uploaded ROM compele? (JDM 2003 Forester AG572-1355)

Who is online