RomRaider

Hi for all.
Have a patched ROM and have a problem
Not work launch control rev limit and FFS rev limit. Do not work and while driving and at the time of standing

But Redline rev limit is work
setting value
1) Redline revlimit fuel cut - 5000rpm
2) FFS rev limit 4500
3) LC rev limit us 4000rpm
5) rpm treshold 3mph

clutch switch in log always "1"- press.
ROM is A2WC412i

Offtop to Merp
Is it possible to make a full patch (LC + FFS + knock cel and etc) and how long to wait?

Just give some context here - I've ported NSFW's LC / FFS patch from Merp's A2ZJB11J patch (these two roms are very similar wrt the logic). I have used the correct bitmask with respect to the "rev limiter active" switch, and the patch is identical - so I doubt it's the code. I've ported before, and not had an issue.

The main difference with MikeXTI's rom is that he has done an AT to MT conversion, and the clutch switch is hardwired to be "1" permanently (i.e. clutch depressed). Given the clutch input is a key component for the patch, it obviously takes out some functionality - but it's not doing what I expected, which would be:

* Below FFS threshold speed, LC should work - since the conditions clutch engaged AND speed below threshold are met.
* Above the speed threshold, FFS would not really be usable - since it would effectively work as a rev limiter with clutch switch = 1 permanently.

Instead, all that is working is the rev limiter. I'm stumped.

And MikeXTI - I am already working with Merp to do a full patch.

O thanks! ))) while on the subject are no more questions. just going to wait for a personal message about preparedness

I think I've got the issue - bitmask on the clutch switch as well. Will revert.

i always online and ready to test )

Check your PM - sent. Damn bitmasks...

Thanks ) work perfect )