RomRaider

Hi,

I am working on reverse engineering project of DCCD control unit on my STI 2008. I want to kindly ask you if someone has DCCD CAN messages decoded?
It will be much easier for me to start the project if I will have this base. Of course if not, I will do it.
I know there are some infos also here like-CAN messages Decoded, but there is not complete info and maybe no longer updated
Infos I find here- ABS wheel speed CAN messages (for every wheel), steering angle sensor CAN messages and few some others, but no all.

I need these inputs: Wheel speed from ABS sensors (every wheel), rpm, steering angle, throttle (%), MAP sensor, brake pressure, handbrake switch, neutral position switch, reverse position switch, YAW sensor, G-sensor, DCCD auto / manual switch (if its there), DCCD +switch (if its there), DCCD - switch (if its there), DCCD actual lock (Dash Display message + Manual / Auto light on Dash).

Thank you for help / support.

There is some info here.
https://web.archive.org/web/20151220002 ... -messages/
It was part of the Subaru Diesel ECU analysis, so it may not be completely relavent.

Thank you dschultz ! Thats great info there ! Did you have oportunity to see what type of MCU is there- I mean in stock DCCD controler ?

Did you find this: viewtopic.php?f=40&t=20850

Yes, thank you rimwall, there are very useful infos for me also ! Thx