RomRaider

Hello, i have partial 32kb read from Alpina E46 B3.3, but some maps that i want are showing "0".
I tried to open the same 0110C6 from M52B28TU engine but these maps romraider shows like it should.

Can you help me with that?

Here is bin:

That's because alpina doesn't use those maps. There are also some other differences that may not be so clear at first. For example alpina doesn't have the m52 dual vanos in the engine. Only on/off single vanos and also the intake doesn't have disa valve. So alpina uses disa maps/output to control the vanos.

So it doesn't use 91 and 98 maps by petrol? Maps which i need for AFR is clear, but what maps should i use to change ignition?

The only ones that are available.
If I remember correctly they're the 'cold' ones.

Do you have full dump? interesting what is throttle logic there

Here is full dump.

But as far as I know, the code part is same as in regular C6. All the "magic" is done by adjusting settings on partial section.

There's no difference between Alpina C6 and normal C6 programming section.

Ok, thank you gents. Yes, seems right. yesterday I read abt their engine and throttle is the same like m52tu

Does anyone have alpina flash for ms43?
It would be highly appreciated if someone posts it here, or in ms43 thread