INPA and E90 help

Alexduplo · **Joined:** Sun May 22, 2022 9:59 am **Posts:** 51

I Have INPA D+cable but it only work on cars with K-line
It wont work on E60,E90 but it is listed in INPA program. Do I need newer version of INPA or?

killiand1 · **Joined:** Sun Sep 11, 2022 7:58 am **Posts:** 3

hello,

Does your cable have a switch? if not you need to install one between pins 7-8. depending on the bmw model you shunts or not

fampie · **Joined:** Fri Nov 12, 2021 8:44 am **Posts:** 1

Alexduplo wrote:

I Have INPA D+cable but it only work on cars with K-line
It wont work on E60,E90 but it is listed in INPA program. Do I need newer version of INPA or?

I have the same issue, my old cable broke which read the e90, the replacement can't, i think it's something to do with the ftd chip in the head or something, even when bridged on pin 7&8 i still can't read the e90, especially the lci models

godfrey916 · **Joined:** Sun May 03, 2020 5:48 pm **Posts:** 4

fampie wrote:

Alexduplo wrote:

I Have INPA D+cable but it only work on cars with K-line
It wont work on E60,E90 but it is listed in INPA program. Do I need newer version of INPA or?

I have the same issue, my old cable broke which read the e90, the replacement can't, i think it's something to do with the ftd chip in the head or something, even when bridged on pin 7&8 i still can't read the e90, especially the lci models

godfrey916 · **Joined:** Sun May 03, 2020 5:48 pm **Posts:** 4

dcan wont work on e90 facelift/lci models ony preface,try with icom or ista or get a cheap delphi diagnostic tool

chilledn52 · **Joined:** Thu Apr 13, 2023 9:42 pm **Posts:** 1

As mentioned above, only works till 2009 models. Also have you tried the different combinations of pin position while trying to connect ista? '
To add on, make sure in your device manager that the K+DCAN response time is set to 1ms.

RomRaider

INPA and E90 help

Who is online