RomRaider

I am new to the boards and have been doing some logging and reading and getting acquainted. I've tried a few times to use Learning View to look at long term corrections but I haven't been able to get it to connect. I have been able to use the "LTV" tab inside of the RomRaider logger to access the FLKC table and it has a small table for fuel trims based on g/rev but I wasn't sure if this was everything that is available for a 16 bit ECU. I have a 2003 WRX USDM. Reading and downloading the ROM from from romraider worked fine, logging works fine. Have not attempted to write anything yet.

Can someone let me know if that is everything that is available to see? I think the A/F Learning that I'm seeing in the logger LTV tab is the only ram stored information on the 16 bit for fuel and the A/F Correction (STFT) can be captured through logging? is that correct? If so, I don't need to worry about learning view.

Just want to make sure I'm able to capture all the needed information. I'll keep questions about effects of the fuel trims on tuning for a separate thread.