What do I need to do to ensure that a table is included in RomRaider Editor compare results please? For example the def below doesn't show on compare results when table values differ between ROM's (with the same ECU & CAL id).
<table type="3D" name="Calculated Engine Torque A" category="Drive-by-Wire Throttle (DBW)" storagetype="uint16" endian="big" sizex="14" sizey="18" storageaddress="0xC11EC">
<!-- min: 0 max: 372.8672 average: 157.066 -->
<scaling units="" expression="x*0.0078125" to_byte="x/0.0078125" format="0.000" fineincrement="0.01" coarseincrement="0.1" />
<table type="X Axis" name="" storagetype="float" storageaddress="0xC116C">
<!-- 0.1498127 to 2.097378 -->
<scaling units="" expression="x" to_byte="x" format="0.00" fineincrement="1" coarseincrement="5" />
</table>
<table type="Y Axis" name="" storagetype="float" storageaddress="0xC11A4">
<!-- 600 to 6800 -->
<scaling units="" expression="x" to_byte="x" format="0.00" fineincrement="1" coarseincrement="5" />
</table>
<description>
</description>
</table>
