|
RomRaider
Documentation
Community
Developers
|
 
|
Page 1 of 1
|
[ 10 posts ] |
|
| Author |
Message |
|
05Pzev
|
Post subject: After reloading windows , can't use logger  Posted: Fri Jun 23, 2023 4:01 pm |
|
 |
| RomRaider Donator |
Joined: Sun Jan 03, 2016 10:05 am
Posts: 217
|
|
I formatted my computer and now I cannot seem to get logger to work (note, I use logger and EcuFlash, so have not tried to get RomRaider ECU editor itself to work). I was previously using an older stand alone version of logger, which I can't seem to find now. So I am trying via the latest version of RomRaider and latest logger defs.
Here is the error.
15:47:22,943 DEBUG [Query Manager] - ECU Init Request ---> 8010F001BF40
15:47:22,943 TRACE [Query Manager] - Reading stale data
15:47:22,943 TRACE [Query Manager] - Writing bytes
15:47:24,971 DEBUG [Query Manager] - ECU Init Response <---
15:47:24,971 ERROR [Query Manager] - Error sending init: Parameter response must not be null or empty
15:47:25,083 INFO [Query Manager] - Connection closed.
15:47:26,083 INFO [Query Manager] - Trying serial connection...
15:47:26,893 INFO [Query Manager] - Connected to: COM4
15:47:26,893 INFO [Query Manager] - Serial connection initialised: SerialConnectionProperties[baudRate=4800, dataBits=8, stopBits=1, parity=0, connectTimeout=2000, sendTimeout=55]
Same hardware was working before. EcuFlash is working as expected (read and flash). Any ideas on this or what I might try?
|
|
| Top |
|
 |
|
dschultz
|
Post subject: Re: After reloading windows , can't use logger Posted: Tue Jul 11, 2023 8:14 pm |
|
|
| RomRaider Developer |
Joined: Wed May 20, 2009 9:49 pm
Posts: 7314
Location: Canada eh!
|
|
Openport 2 or VAG-COM cable?
|
|
| Top |
|
|
|
05Pzev
|
Post subject: Re: After reloading windows , can't use logger Posted: Wed Jul 12, 2023 10:10 am |
|
|
| RomRaider Donator |
Joined: Sun Jan 03, 2016 10:05 am
Posts: 217
|
Here is the cable. Worked fine for years until I decided to reinstalled Windows LOL. Could it be a difference between the old logger software and newer? Is it possible to get ahold of the old logger-only software? Or maybe it is the driver I am using? Quote: EvoScan 1.3U Universal USB Datalogging and Reflashing Cable (Additional Extension Cable with Any Purchase: Evo AYC/ACD or Subaru Reflash Support Required?: Subaru Reflashing (keep pin9))
|
|
| Top |
|
|
|
dschultz
|
Post subject: Re: After reloading windows , can't use logger Posted: Thu Jul 13, 2023 8:36 pm |
|
|
| RomRaider Developer |
Joined: Wed May 20, 2009 9:49 pm
Posts: 7314
Location: Canada eh!
|
|
| Top |
|
|
|
05Pzev
|
Post subject: Re: After reloading windows , can't use logger Posted: Mon Jul 17, 2023 10:22 am |
|
|
| RomRaider Donator |
Joined: Sun Jan 03, 2016 10:05 am
Posts: 217
|
Thanks, here's the log. And attached an image showing that the cable does map to com port 4. Code: 10:06:46,174 INFO [main] - RomRaider 0.9.4 MAY23 2022 Build: 1184
10:06:46,174 INFO [main] - When requesting assistance at https://www.romraider.com, please include the System Properties information below:
10:06:46,190 INFO [main] - Monday, July 17, 2023 10:06:46 AM EDT
10:06:46,190 INFO [main] - System Properties:
{java.runtime.name=Java(TM) SE Runtime Environment
awt.useSystemAAFontSettings=lcd
sun.boot.library.path=C:\Program Files (x86)\Java\jre-1.8\bin
java.vm.version=25.371-b11
sun.java2d.d3d=true
java.vm.vendor=Oracle Corporation
java.vendor.url=http://java.oracle.com/
path.separator=;
java.vm.name=Java HotSpot(TM) Client VM
file.encoding.pkg=sun.io
user.country=US
user.script=
sun.java.launcher=SUN_STANDARD
sun.os.patch.level=Service Pack 1
java.vm.specification.name=Java Virtual Machine Specification
user.dir=C:\Program Files\RomRaider
java.runtime.version=1.8.0_371-b11
java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironment
java.endorsed.dirs=C:\Program Files (x86)\Java\jre-1.8\lib\endorsed
os.arch=x86
java.io.tmpdir=C:\Users\patrick\AppData\Local\Temp\
line.separator=
java.vm.specification.vendor=Oracle Corporation
user.variant=
os.name=Windows 7
sun.jnu.encoding=Cp1252
java.library.path=lib/windows
java.specification.name=Java Platform API Specification
java.class.version=52.0
sun.management.compiler=HotSpot Client Compiler
os.version=6.1
user.home=C:\Users\patrick
user.timezone=America/New_York
java.awt.printerjob=sun.awt.windows.WPrinterJob
file.encoding=Cp1252
java.specification.version=1.8
java.class.path=C:\Program Files\RomRaider\RomRaider.jar
user.name=patrick
java.vm.specification.version=1.8
sun.java.command=C:\Program Files\RomRaider\RomRaider.jar -logger
java.home=C:\Program Files (x86)\Java\jre-1.8
sun.arch.data.model=32
user.language=en
java.specification.vendor=Oracle Corporation
awt.toolkit=sun.awt.windows.WToolkit
java.vm.info=mixed mode
java.version=1.8.0_371
java.ext.dirs=C:\Program Files (x86)\Java\jre-1.8\lib\ext;C:\Windows\Sun\Java\lib\ext
sun.boot.class.path=C:\Program Files (x86)\Java\jre-1.8\lib\resources.jar;C:\Program Files (x86)\Java\jre-1.8\lib\rt.jar;C:\Program Files (x86)\Java\jre-1.8\lib\jsse.jar;C:\Program Files (x86)\Java\jre-1.8\lib\jce.jar;C:\Program Files (x86)\Java\jre-1.8\lib\charsets.jar;C:\Program Files (x86)\Java\jre-1.8\lib\jfr.jar;C:\Program Files (x86)\Java\jre-1.8\classes
java.vendor=Oracle Corporation
swing.aatext=true
java.specification.maintenance.version=4
file.separator=\
java.vendor.url.bug=http://bugreport.sun.com/bugreport/
sun.io.unicode.encoding=UnicodeLittle
sun.cpu.endian=little
sun.desktop=windows
sun.cpu.isalist=pentium_pro+mmx pentium_pro pentium+mmx pentium i486 i386 i86}
10:06:46,346 INFO [main] - Loaded settings from file: C:/Users/patrick/.RomRaider/settings.xml
10:06:46,377 INFO [main] - Logger locale: en_US
10:06:46,625 WARN [main] - No cars_def.xml file found, possible missing DTD issue?
10:06:46,657 INFO [main] - 0 ECU definitions loaded from 0 files
10:06:46,657 INFO [main] - Plugin loaded: AEM UEGO AFR [9600 baud] v0.05
10:06:46,657 INFO [main] - Plugin loaded: AEM X-Wifi Controller v0.01
10:06:46,657 INFO [main] - Plugin loaded: AEM UEGO Lambda [19200] v0.02
10:06:46,672 INFO [main] - Plugin loaded: APSX D1|D2 WBO2 v0.01
10:06:46,672 INFO [main] - Plugin loaded: ECOTRONS Accurate Lambda Meter v0.01
10:06:46,672 INFO [main] - Plugin loaded: 14Point7 NAW_7S UEGO v0.03
10:06:46,672 INFO [main] - Plugin loaded: Innovate Wideband AFR v0.02
10:06:46,719 WARN [main] - Innovate LogWorks MTS control does not appear to be installed on this computer
10:06:46,719 INFO [main] - Plugin loaded: MRF Stealth Gauge v0.02
10:06:47,031 INFO [main] - Plugin loaded: Phidget InterfaceKit v0.02
10:06:47,031 INFO [main] - Plugin loaded: PLX SM-AFR v0.05
10:06:47,031 INFO [main] - Plugin loaded: Tech Edge (Format 2.0) v0.03
10:06:47,031 INFO [main] - Plugin loaded: TXS Tuner Logger v2013.04.04
10:06:47,047 INFO [main] - Plugin loaded: TXS UTEC Logger v2013.04.04
10:06:47,047 INFO [main] - Plugin loaded: Zeitronix ZT-2 v0.03
10:06:47,452 DEBUG [main] - Setting file logger switch monitor: [S20] Rear Defogger Switch
10:06:47,452 INFO [main] - loaded protocol SSM: 245 parameters, 172 switches from def version 370.
10:06:47,452 TRACE [main] - Connect count [14Point7 NAW_7S UEGO]: 0
10:06:47,452 TRACE [main] - Connect count [14Point7 NAW_7S UEGO]: 0
10:06:47,452 TRACE [main] - Connect count [14Point7 NAW_7S UEGO]: 0
10:06:47,452 TRACE [main] - Connect count [AEM UEGO Lambda [19200]]: 0
10:06:47,452 TRACE [main] - Connect count [AEM UEGO Lambda [19200]]: 0
10:06:47,452 TRACE [main] - Connect count [AEM UEGO Lambda [19200]]: 0
10:06:47,452 TRACE [main] - Connect count [AEM UEGO AFR [9600 baud]]: 0
10:06:47,452 TRACE [main] - Connect count [AEM UEGO AFR [9600 baud]]: 0
10:06:47,452 TRACE [main] - Connect count [AEM UEGO AFR [9600 baud]]: 0
10:06:47,452 TRACE [main] - Connect count [AEM X-Wifi Controller]: 0
10:06:47,452 TRACE [main] - Connect count [AEM X-Wifi Controller]: 0
10:06:47,452 TRACE [main] - Connect count [AEM X-Wifi Controller]: 0
10:06:47,452 TRACE [main] - Connect count [AEM X-Wifi Controller]: 0
10:06:47,452 TRACE [main] - Connect count [AEM X-Wifi Controller]: 0
10:06:47,452 TRACE [main] - Connect count [AEM X-Wifi Controller]: 0
10:06:47,452 TRACE [main] - Connect count [AEM X-Wifi Controller]: 0
10:06:47,452 TRACE [main] - Connect count [AEM X-Wifi Controller]: 0
10:06:47,452 TRACE [main] - Connect count [AEM X-Wifi Controller]: 0
10:06:47,452 TRACE [main] - Connect count [APSX D1|D2 WBO2]: 0
10:06:47,452 TRACE [main] - Connect count [APSX D1|D2 WBO2]: 0
10:06:47,452 TRACE [main] - Connect count [APSX D1|D2 WBO2]: 0
10:06:47,452 TRACE [main] - Connect count [ECOTRONS Accurate Lambda Meter]: 0
10:06:47,452 TRACE [main] - Connect count [ECOTRONS Accurate Lambda Meter]: 0
10:06:47,452 TRACE [main] - Connect count [ECOTRONS Accurate Lambda Meter]: 0
10:06:47,452 TRACE [main] - Connect count [ECOTRONS Accurate Lambda Meter]: 0
10:06:47,452 TRACE [main] - Connect count [ECOTRONS Accurate Lambda Meter]: 0
10:06:47,452 TRACE [main] - Connect count [ECOTRONS Accurate Lambda Meter]: 0
10:06:47,452 TRACE [main] - Connect count [ECOTRONS Accurate Lambda Meter]: 0
10:06:47,452 TRACE [main] - Connect count [ECOTRONS Accurate Lambda Meter]: 0
10:06:47,452 TRACE [main] - Connect count [ECOTRONS Accurate Lambda Meter]: 0
10:06:47,452 TRACE [main] - Connect count [ECOTRONS Accurate Lambda Meter]: 0
10:06:47,452 TRACE [main] - Connect count [ECOTRONS Accurate Lambda Meter]: 0
10:06:47,452 TRACE [main] - Connect count [ECOTRONS Accurate Lambda Meter]: 0
10:06:47,452 TRACE [main] - Connect count [ECOTRONS Accurate Lambda Meter]: 0
10:06:47,452 TRACE [main] - Connect count [ECOTRONS Accurate Lambda Meter]: 0
10:06:47,452 TRACE [main] - Connect count [ECOTRONS Accurate Lambda Meter]: 0
10:06:47,452 TRACE [main] - Connect count [ECOTRONS Accurate Lambda Meter]: 0
10:06:47,452 TRACE [main] - Connect count [ECOTRONS Accurate Lambda Meter]: 0
10:06:47,452 TRACE [main] - Connect count [ECOTRONS Accurate Lambda Meter]: 0
10:06:47,452 TRACE [main] - Connect count [ECOTRONS Accurate Lambda Meter]: 0
10:06:47,452 TRACE [main] - Connect count [ECOTRONS Accurate Lambda Meter]: 0
10:06:47,452 TRACE [main] - Connect count [ECOTRONS Accurate Lambda Meter]: 0
10:06:47,452 TRACE [main] - Connect count [ECOTRONS Accurate Lambda Meter]: 0
10:06:47,452 TRACE [main] - Connect count [ECOTRONS Accurate Lambda Meter]: 0
10:06:47,452 TRACE [main] - Connect count [ECOTRONS Accurate Lambda Meter]: 0
10:06:47,452 TRACE [main] - Connect count [ECOTRONS Accurate Lambda Meter]: 0
10:06:47,452 TRACE [main] - Connect count [ECOTRONS Accurate Lambda Meter]: 0
10:06:47,452 TRACE [main] - Connect count [ECOTRONS Accurate Lambda Meter]: 0
10:06:47,452 TRACE [main] - Connect count [Innovate Wideband AFR]: 0
10:06:47,452 TRACE [main] - Connect count [Innovate Wideband AFR]: 0
10:06:47,452 TRACE [main] - Connect count [Innovate Wideband AFR]: 0
10:06:47,452 TRACE [main] - Connect count [MRF Stealth Gauge]: 0
10:06:47,452 TRACE [main] - Connect count [MRF Stealth Gauge]: 0
10:06:47,452 TRACE [main] - Connect count [MRF Stealth Gauge]: 0
10:06:47,468 TRACE [main] - Connect count [MRF Stealth Gauge]: 0
10:06:47,468 TRACE [main] - Connect count [MRF Stealth Gauge]: 0
10:06:47,468 TRACE [main] - Connect count [MRF Stealth Gauge]: 0
10:06:47,468 TRACE [main] - Connect count [MRF Stealth Gauge]: 0
10:06:47,468 TRACE [main] - Connect count [MRF Stealth Gauge]: 0
10:06:47,468 TRACE [main] - Connect count [MRF Stealth Gauge]: 0
10:06:47,468 TRACE [main] - Connect count [MRF Stealth Gauge]: 0
10:06:47,468 TRACE [main] - Connect count [MRF Stealth Gauge]: 0
10:06:47,468 TRACE [main] - Connect count [MRF Stealth Gauge]: 0
10:06:47,468 TRACE [main] - Connect count [MRF Stealth Gauge]: 0
10:06:47,468 TRACE [main] - Connect count [MRF Stealth Gauge]: 0
10:06:47,468 TRACE [main] - Connect count [MRF Stealth Gauge]: 0
10:06:47,468 TRACE [main] - Connect count [MRF Stealth Gauge]: 0
10:06:47,468 TRACE [main] - Connect count [MRF Stealth Gauge]: 0
10:06:47,468 TRACE [main] - Connect count [MRF Stealth Gauge]: 0
10:06:47,468 TRACE [main] - Connect count [MRF Stealth Gauge]: 0
10:06:47,468 TRACE [main] - Connect count [MRF Stealth Gauge]: 0
10:06:47,468 TRACE [main] - Connect count [MRF Stealth Gauge]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [PLX SM-AFR]: 0
10:06:47,468 TRACE [main] - Connect count [TXS Tuner Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS Tuner Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS Tuner Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS Tuner Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS Tuner Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS Tuner Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS Tuner Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS Tuner Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS Tuner Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS Tuner Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS Tuner Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS Tuner Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [TXS UTEC Logger]: 0
10:06:47,468 TRACE [main] - Connect count [Tech Edge (Format 2.0)]: 0
10:06:47,468 TRACE [main] - Connect count [Tech Edge (Format 2.0)]: 0
10:06:47,468 TRACE [main] - Connect count [Tech Edge (Format 2.0)]: 0
10:06:47,468 TRACE [main] - Connect count [Tech Edge (Format 2.0)]: 0
10:06:47,468 TRACE [main] - Connect count [Tech Edge (Format 2.0)]: 0
10:06:47,468 TRACE [main] - Connect count [Tech Edge (Format 2.0)]: 0
10:06:47,468 TRACE [main] - Connect count [Tech Edge (Format 2.0)]: 0
10:06:47,468 TRACE [main] - Connect count [Tech Edge (Format 2.0)]: 0
10:06:47,468 TRACE [main] - Connect count [Tech Edge (Format 2.0)]: 0
10:06:47,468 TRACE [main] - Connect count [Tech Edge (Format 2.0)]: 0
10:06:47,468 TRACE [main] - Connect count [Tech Edge (Format 2.0)]: 0
10:06:47,468 TRACE [main] - Connect count [Tech Edge (Format 2.0)]: 0
10:06:47,468 TRACE [main] - Connect count [Tech Edge (Format 2.0)]: 0
10:06:47,468 TRACE [main] - Connect count [Tech Edge (Format 2.0)]: 0
10:06:47,468 TRACE [main] - Connect count [Tech Edge (Format 2.0)]: 0
10:06:47,468 TRACE [main] - Connect count [Tech Edge (Format 2.0)]: 0
10:06:47,468 TRACE [main] - Connect count [Tech Edge (Format 2.0)]: 0
10:06:47,468 TRACE [main] - Connect count [Tech Edge (Format 2.0)]: 0
10:06:47,468 TRACE [main] - Connect count [Tech Edge (Format 2.0)]: 0
10:06:47,468 TRACE [main] - Connect count [Tech Edge (Format 2.0)]: 0
10:06:47,468 TRACE [main] - Connect count [Tech Edge (Format 2.0)]: 0
10:06:47,468 TRACE [main] - Connect count [Tech Edge (Format 2.0)]: 0
10:06:47,468 TRACE [main] - Connect count [Tech Edge (Format 2.0)]: 0
10:06:47,468 TRACE [main] - Connect count [Tech Edge (Format 2.0)]: 0
10:06:47,468 TRACE [main] - Connect count [Tech Edge (Format 2.0)]: 0
10:06:47,468 TRACE [main] - Connect count [Tech Edge (Format 2.0)]: 0
10:06:47,468 TRACE [main] - Connect count [Tech Edge (Format 2.0)]: 0
10:06:47,468 TRACE [main] - Connect count [Zeitronix ZT-2]: 0
10:06:47,468 TRACE [main] - Connect count [Zeitronix ZT-2]: 0
10:06:47,468 TRACE [main] - Connect count [Zeitronix ZT-2]: 0
10:06:47,468 TRACE [main] - Connect count [Zeitronix ZT-2]: 0
10:06:47,468 TRACE [main] - Connect count [Zeitronix ZT-2]: 0
10:06:47,468 TRACE [main] - Connect count [Zeitronix ZT-2]: 0
10:06:47,468 TRACE [main] - Connect count [Zeitronix ZT-2]: 0
10:06:47,468 TRACE [main] - Connect count [Zeitronix ZT-2]: 0
10:06:47,468 TRACE [main] - Connect count [Zeitronix ZT-2]: 0
10:06:47,468 TRACE [main] - Connect count [Zeitronix ZT-2]: 0
10:06:47,468 TRACE [main] - Connect count [Zeitronix ZT-2]: 0
10:06:47,468 TRACE [main] - Connect count [Zeitronix ZT-2]: 0
10:06:47,468 TRACE [main] - Connect count [Zeitronix ZT-2]: 0
10:06:47,468 TRACE [main] - Connect count [Zeitronix ZT-2]: 0
10:06:47,468 TRACE [main] - Connect count [Zeitronix ZT-2]: 0
10:06:47,468 TRACE [main] - Connect count [Zeitronix ZT-2]: 0
10:06:47,483 TRACE [main] - Connect count [Zeitronix ZT-2]: 0
10:06:47,483 TRACE [main] - Connect count [Zeitronix ZT-2]: 0
10:06:55,062 DEBUG [Query Manager] - QueryManager started.
10:06:55,062 INFO [Query Manager] - J2534 Library names loaded from file: ./customize/j2534Libraries.properties
10:06:55,227 INFO [Query Manager] - Trying serial connection...
10:06:56,054 INFO [Query Manager] - Connected to: COM4
10:06:56,070 INFO [Query Manager] - Serial connection initialised: SerialConnectionProperties[baudRate=4800, dataBits=8, stopBits=1, parity=0, connectTimeout=2000, sendTimeout=55]
10:06:56,085 DEBUG [Query Manager] - ECU Init Request ---> 8010F001BF40
10:06:56,085 TRACE [Query Manager] - Reading stale data
10:06:56,085 TRACE [Query Manager] - Writing bytes
10:06:58,119 DEBUG [Query Manager] - ECU Init Response <---
10:06:58,120 ERROR [Query Manager] - Error sending init: Parameter response must not be null or empty
10:06:58,229 INFO [Query Manager] - Connection closed.
10:06:59,243 INFO [Query Manager] - Trying serial connection...
10:07:00,054 INFO [Query Manager] - Connected to: COM4
10:07:00,054 INFO [Query Manager] - Serial connection initialised: SerialConnectionProperties[baudRate=4800, dataBits=8, stopBits=1, parity=0, connectTimeout=2000, sendTimeout=55]
10:07:00,054 DEBUG [Query Manager] - ECU Init Request ---> 8010F001BF40
10:07:00,054 TRACE [Query Manager] - Reading stale data
10:07:00,054 TRACE [Query Manager] - Writing bytes
10:07:02,086 DEBUG [Query Manager] - ECU Init Response <---
10:07:02,086 ERROR [Query Manager] - Error sending init: Parameter response must not be null or empty
10:07:02,197 INFO [Query Manager] - Connection closed.
10:07:03,211 INFO [Query Manager] - Trying serial connection...
10:07:04,022 INFO [Query Manager] - Connected to: COM4
10:07:04,022 INFO [Query Manager] - Serial connection initialised: SerialConnectionProperties[baudRate=4800, dataBits=8, stopBits=1, parity=0, connectTimeout=2000, sendTimeout=55]
10:07:04,022 DEBUG [Query Manager] - ECU Init Request ---> 8010F001BF40
10:07:04,022 TRACE [Query Manager] - Reading stale data
10:07:04,022 TRACE [Query Manager] - Writing bytes
10:07:06,054 DEBUG [Query Manager] - ECU Init Response <---
10:07:06,054 ERROR [Query Manager] - Error sending init: Parameter response must not be null or empty
10:07:06,165 INFO [Query Manager] - Connection closed.
10:07:07,179 INFO [Query Manager] - Trying serial connection...
10:07:07,990 INFO [Query Manager] - Connected to: COM4
10:07:07,990 INFO [Query Manager] - Serial connection initialised: SerialConnectionProperties[baudRate=4800, dataBits=8, stopBits=1, parity=0, connectTimeout=2000, sendTimeout=55]
10:07:07,990 DEBUG [Query Manager] - ECU Init Request ---> 8010F001BF40
10:07:07,990 TRACE [Query Manager] - Reading stale data
10:07:07,990 TRACE [Query Manager] - Writing bytes
10:07:10,022 DEBUG [Query Manager] - ECU Init Response <---
10:07:10,022 ERROR [Query Manager] - Error sending init: Parameter response must not be null or empty
10:07:10,133 INFO [Query Manager] - Connection closed.
10:07:11,147 INFO [Query Manager] - Trying serial connection...
10:07:11,381 DEBUG [AWT-EventQueue-0] - LoggerControllerImpl - Stopping QueryManager: Query Manager
10:07:11,381 DEBUG [AWT-EventQueue-0] - LoggerControllerImpl - Waiting for QueryManager Query Manager to terminate
10:07:11,381 INFO [Query Manager] - Connected to: COM4
10:07:11,381 INFO [Query Manager] - Serial connection initialised: SerialConnectionProperties[baudRate=4800, dataBits=8, stopBits=1, parity=0, connectTimeout=2000, sendTimeout=55]
10:07:11,381 DEBUG [Query Manager] - ECU Init Request ---> 8010F001BF40
10:07:11,381 TRACE [Query Manager] - Reading stale data
10:07:11,381 TRACE [Query Manager] - Writing bytes
10:07:11,381 TRACE [Query Manager] - Sleep interrupted
java.lang.InterruptedException: sleep interrupted
at java.lang.Thread.sleep(Native Method)
at java.lang.Thread.sleep(Unknown Source)
at java.util.concurrent.TimeUnit.sleep(Unknown Source)
at com.romraider.util.ThreadUtil.sleep(Unknown Source)
at com.romraider.io.serial.connection.SerialConnectionManager.send(Unknown Source)
at com.romraider.logger.ecu.comms.io.connection.SSMLoggerConnection.ecuInit(Unknown Source)
at com.romraider.logger.ecu.comms.manager.QueryManagerImpl.initConnection(Unknown Source)
at com.romraider.logger.ecu.comms.manager.QueryManagerImpl.doEcuInit(Unknown Source)
at com.romraider.logger.ecu.comms.manager.QueryManagerImpl.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
10:07:13,418 DEBUG [Query Manager] - ECU Init Response <---
10:07:13,418 ERROR [Query Manager] - Error sending init: Parameter response must not be null or empty
10:07:13,529 INFO [Query Manager] - Connection closed.
10:07:14,537 DEBUG [Query Manager] - QueryManager stopped.
10:07:14,537 DEBUG [AWT-EventQueue-0] - LoggerControllerImpl - QueryManager Query Manager state: TERMINATED
You do not have the required permissions to view the files attached to this post.
|
|
| Top |
|
|
|
dschultz
|
Post subject: Re: After reloading windows , can't use logger Posted: Tue Jul 18, 2023 9:19 pm |
|
|
| RomRaider Developer |
Joined: Wed May 20, 2009 9:49 pm
Posts: 7314
Location: Canada eh!
|
|
I'm at a loss. It acts like there's no connection between the cable and ECU, or the ignition is not switched on.
|
|
| Top |
|
|
|
05Pzev
|
Post subject: Re: After reloading windows , can't use logger Posted: Wed Jul 26, 2023 1:42 pm |
|
|
| RomRaider Donator |
Joined: Sun Jan 03, 2016 10:05 am
Posts: 217
|
|
Is it possible to find the old versions of logger? Just to see if that is any different.
Also not sure if it could be a driver issue.... even though it works with EcuFlash?
|
|
| Top |
|
|
|
05Pzev
|
Post subject: Re: After reloading windows , can't use logger Posted: Wed Jul 26, 2023 3:06 pm |
|
|
| RomRaider Donator |
Joined: Sun Jan 03, 2016 10:05 am
Posts: 217
|
|
Well it looks like v0.5.9RC3 works so I will just use that!
|
|
| Top |
|
|
|
dschultz
|
Post subject: Re: After reloading windows , can't use logger Posted: Fri Jul 28, 2023 8:52 pm |
|
|
| RomRaider Developer |
Joined: Wed May 20, 2009 9:49 pm
Posts: 7314
Location: Canada eh!
|
You can try v0.8.2, it has the old serial port library. In 0.9 it was replaced with a maintained serial library, but I've had no issue using the new one with generic VAG-COM serial cables. Your log indicates no issue finding, accessing and transmitting, maybe receiving is an issue. If you had a OBD-II Y-cable, you could monitor the line to see if the Logger can transmit, if it does and the ECU sends data back that might point to the issue.
|
|
| Top |
|
|
|
dschultz
|
Post subject: Re: After reloading windows , can't use logger Posted: Fri Dec 01, 2023 10:42 pm |
|
|
| RomRaider Developer |
Joined: Wed May 20, 2009 9:49 pm
Posts: 7314
Location: Canada eh!
|
|
This issue has been fixed in RomRaider release 1.0.0
|
|
| Top |
|
|
|
|
Page 1 of 1
|
[ 10 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 1 guest |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
