RomRaider

So I've been struggling to find a solution to my issue. I have a genuine Tactrix 1.3 cable that came with my 2005 LGT when I originally bought it a couple years ago.

My issue is that whenever I try to connect to my Tactrix cable to RR Logger, it detects the com Port 3 being in use by the cable and try to connect to the ECU but fails to int after a couple attempts. But that same cable works with no issue with EcuFlash on the same computer and Btssm. Also, I've uploaded and flashed with the same cable recently with ecuflash and didn't have any issues with it.

I've tried my buddy's 2.0 cable and RR Logger was able to connect to the ECU and read data but oddly enough my CAL ID is shown to be unknown. A couple years ago, I was able to data log with my 1.3 cable on the same computer but at some point I had to factory reset my computer and ever since then, it hasn't been able to connect properly.

Here's what I've tried:
- Plug in 1.3 cable and then launching RR Logger (no Success)
- Launching RR Logger as administration (no success)
- Completely wipe the computer and start with a fresh copy of windows, reinstalling ECU Flash & RR with all the lastest definitions files properly assigned to each program directory. (No success)
- Reverting my computer from Windows 11 to Windows 10 and only having the RR and ecuflash software on it. (no success)
- Switching between the different 2.0/3.0 USB ports (no success)

I don't know if it's ECU related or software related. Windows device manager does show Tactrix 1.3 cable being detected.

Also, if anyone is interested in helping me with trying to figure out why RR Logger isn't detecting my AEM com input, lmk and I'll appreciate it.

Thanks in advance!

Is it similar to this and this?

Yes. Gonna try an old version of Romraider that you recommended in the first post and see if that fixes my issue with my cable. I'll report back. Thanks!

This issue has been fixed in RomRaider release 1.0.0