please help on logging by log file

serdarsalci · **Joined:** Tue Aug 20, 2019 4:08 am **Posts:** 33

hi,

flashing by tactrix 2.0 works but logger couldnt connect w same tactrix to my subaru 06 fxt 2.5

log file is attached pleasehelp..

dschultz · **Posted:** Fri Mar 15, 2024 9:19 pm

It appears as if you have not installed the Openport 2.0 driver, so the Logger only detects your serial port.
Run: "C:\Program Files (x86)\OpenECU\EcuFlash\drivers\openport 2.0\DPInst.exe"

Plus, you have selected OBD on CAN as your protocol, rather than SSM on K-line.

serdarsalci · **Joined:** Tue Aug 20, 2019 4:08 am **Posts:** 33

dschultz wrote:

It appears as if you have not installed the Openport 2.0 driver, so the Logger only detects your serial port.
Run: "C:\Program Files (x86)\OpenECU\EcuFlash\drivers\openport 2.0\DPInst.exe"

Plus, you have selected OBD on CAN as your protocol, rather than SSM on K-line.

Thanks for yoır reply

There is a detection at device manager as vehicle pass thru for tactrix when it is connected. And also openport 2.0 j2534 and vehiclepassthru are shown as already loaded at program and featues list. Then now I checked to run dpinst.exe as you said and pc said that this language not support by device manager !

Is it due to this? Pc is win7 with java8

I will select ssm kline connection from nowon for my tactrix connection..

SM-G998B cihazımdan Tapatalk kullanılarak gönderildi

dschultz · **Posted:** Sat Mar 16, 2024 6:16 pm

EcuFlash, Openport 2.0 and its drivers have no relation to Java.

Is it working now?

RomRaider relies on Windows Registry entries to locate J2534 devices and load the drivers. The dpinst.exe program will populate the Registry with the require information. I don't know if there is any language dependency with drivers or the registry.

serdarsalci · **Joined:** Tue Aug 20, 2019 4:08 am **Posts:** 33

I will try soon.

Also I noticed that inside ssm kline txt file, it says to load txt file as cnfg name to sd and then insert to tactrix. I will try also this and inform soon

Thanks a lot

SM-G998B cihazımdan Tapatalk kullanılarak gönderildi

dschultz · **Posted:** Sat Mar 16, 2024 6:23 pm

serdarsalci wrote:

Also I noticed that inside ssm kline txt file, it says to load txt file as cnfg name to sd and then insert to tactrix. I will try also this and inform soon

This is the Openport 2.0 standalone logging feature and has nothing to do with RomRaider in any way.

For the driver install, messages are saved to the log: "C:\Windows\INF\setupapi.dev.log" or similar.

serdarsalci · **Joined:** Tue Aug 20, 2019 4:08 am **Posts:** 33

hi,

just will try for sd card.

what to look inside log file as in attached?

serdarsalci · **Joined:** Tue Aug 20, 2019 4:08 am **Posts:** 33

Hi

I tried now with ssm kline and not connected to ecu again as always checks listed comports but they are not related to tactrix. and also selected in settings control file logging with defogger switch, enable fast polling mode but nothing changed.

Also tried to install sd card and pc detected sd on tactrix..

Also tried another usb port on pc, same..

SM-G998B cihazımdan Tapatalk kullanılarak gönderildi

dschultz · **Posted:** Sun Mar 17, 2024 9:25 am

That is not the correct setupapi.dev.log file.
Did you install EcuFlash and the drivers from here?
https://www.tactrix.com/index.php?optio ... &Itemid=57

Post the rr_system.log again.

serdarsalci · **Joined:** Tue Aug 20, 2019 4:08 am **Posts:** 33

hi,

here the log file because nothing changed after reloaded linked defs..

thanks.

dschultz · **Posted:** Tue Mar 19, 2024 7:27 pm

There should be a log entry such as this:
INFO [Query Manager] - Trying new J2534/ISO9141 connection: Tactrix Inc. - OpenPort 2.0 J2534 ISO/CAN/VPW/PWM
But I see none.

What is in the Registry at:
HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\PassThruSupport.04.04\

serdarsalci · **Joined:** Tue Aug 20, 2019 4:08 am **Posts:** 33

Hi.. it is as attached ? Thanks

SM-G998B cihazımdan Tapatalk kullanılarak gönderildi

dschultz · **Posted:** Thu Mar 21, 2024 8:48 pm

That looks correct.
Run RomRaider with more logging and provide a clean rr_system.log.
https://www.romraider.com/index.php/Rom ... HowToDebug

serdarsalci · **Joined:** Tue Aug 20, 2019 4:08 am **Posts:** 33

hi, here again log file, thanks alot

dschultz · **Posted:** Sun Mar 24, 2024 4:27 pm

I guess you didn't change the logging level, no useful info in that log.

RomRaider

Forum rules

please help on logging by log file

Who is online