RomRaider

Hello everyone

I'm trying to use RomRaider's Logger to log data from my '12 Toyota GT86's ECU, using a Tactrix OpenPort 2.0. I am successfully able to read and edit the car's ECU using ECUFlash. Therefore I do not believe this is a driver issue for the OpenPort 2.0. My laptop is running Windows 10 64-bit.

When using the logger, I get the error "Unable to send ECU init" on all logging protocols except OBD>CAN, which I believe is the correct protocol for the GT86/BRZ. If I do not select any data to log, RomRaider states it is "Reading Data". However, if I click the check box for any data to log, it starts to flicker between "Reading Data" and "Connecting...". At the same time "Reading Data" is displayed, the bottom-left status text (that would say 'connecting to ecu' etc.) in red text states "Error: java.lang.sx". all of the data remains at 0, and therefore no logging can occur.

I have found no mention of this error, either here or searching with Google, and therefore I have no idea what to do being unfamiliar with java programming.

I have uninstalled and reinstalled, restarted my laptop, tried both USB ports, uninstalled and reinstalled ECUFlash just in case, the only thing I haven't done is try to reinstall Java - but i had no prior installations of Java before installing RomRaider. Having the engine running or not makes no difference.

Does anyone have any ideas or recommendations as to how I can get the logger working?

Thanks in advance.

it's not really a java error, as far as I know there's no support in romraider for the BRZ you have to log it with SDLogging on the openport or some other 3rd party software.

oh the logger doesn't work with the BRZ at all? Damn thanks for letting me know.