RomRaider

Searching for Slave and Master read because of corrupted file inside of mine.
Please someone share his files with me? Im not interesting in endian hell ... Thanks.

Are they not contained in the same file?
Check the definitions thread for my reads

For sure but indeed of endian hell they are byte swapped so it isnt nice to seperate the two 256KB from the Fullread.
I known your files ... but I need the two 256KB Files from each. One from Slave one from Master Chip so I can burn them to both 29F200 eproms.
Partial and Fullread isnt the problem because I had some of them.

Really nobody had slave and master chip read? Or someone had BDM and read both of them?
I think I really have to bought a spare MSS52 and done by myself.

Maybe its easier if I attache my problems - files.
Thanks for your words.

So done by myself...
Files attached.
After this you have to do a fullflash. Do not read before done this! Or it will be brick again.
Can be done with MSS5x Flasher, BDM ... if you need VIN correction done with BDM, Pinout same as MSS54.

With connector to body right side is master, left one is slave.

Can I use these files also for another bricked ecu MSS52... It's bricked by using Ista/p for programming... Now there is no communication anymore.... Think communiction with bdm will work but can i use these files?

Greets Patrick

Sure, maybe need some modifications after for coding... but will work.
But if you brick with ISTA...