Deceleration

Bimmer12 · **Joined:** Mon Dec 14, 2020 5:13 pm **Posts:** 134

Bimmer12 wrote:

Steezer wrote:

Bimmer12 wrote:

right now I don't have it at hand, since I'm on the phone, my stock item would be the m52bb28 euro, it came from an E39 and it's mounted on an e36, I tried pazis's recommendation but the engine was cold fails ,(unstable idle) and then does not work under normal conditions]

You have a cable to read and write? If you do just pull the partial off the car

Sent from my iPhone using Tapatalk

Of course I have it, the only thing is that right now I'm not on the computer and I don't have it saved, I don't know why you need the partial.

Bimmer12 · **Joined:** Mon Dec 14, 2020 5:13 pm **Posts:** 134

this was my modification Increased "Ignition Delay - Decreasing TPS - Step Size" 15 degrees.Decreased "Ignition Delay - TPS Decreasing (Close)" 10 degrees
Decreased "Ignition Delay - TPS Decreasing" 25 degrees.Changing "Fuel Restore - RPM" above my RPM limiter

itam97 · **Joined:** Wed Oct 20, 2021 8:04 pm **Posts:** 2

Thank u all!!!

Finally i achieved some decent flames from my exhaust

Engine is stock M52B25 and 2.5' exhaust with 2 turbo works mufflers.

Here is the result ---> https://www.youtube.com/watch?v=SEFmvj6YD90

Greetings from Poland

r19 · **Posted:** Tue Mar 01, 2022 6:48 pm

Great result!

Can you share your file ?

itam97 · **Joined:** Wed Oct 20, 2021 8:04 pm **Posts:** 2

I can't find the file

But its basically everything like on previous posts, except fuel map.

I have added 0.20 fuel in first column of load, from 4000rpm to 6500rpm, and 0.10 in the second column, also from 4000rpm to 6500rpm.

That gives me the best results.

And also 2.5' exhaust with 2 sport mufflers, because on stock exhaust there was no flames at all.

Bimmer12 · **Joined:** Mon Dec 14, 2020 5:13 pm **Posts:** 134

0.20 ?! that's a lot of gasoline really, anyway very good job, I love it

daniel_rs · **Joined:** Wed Aug 25, 2021 10:14 am **Posts:** 21

Thank you guys! I made a flame on a friend's e36 323i. The car is completely stock. Exhaust stock, without catalyst and custom rear muffler. Tomorrow I will publish my bin. I hope this will be helpful.
My video https://www.youtube.com/watch?v=dQAY3xW3fSE

daniel_rs · **Joined:** Wed Aug 25, 2021 10:14 am **Posts:** 21

daniel_rs wrote:

Thank you guys! I made a flame on a friend's e36 323i. The car is completely stock. Exhaust stock, without catalyst and custom rear muffler. Tomorrow I will publish my bin. I hope this will be helpful.
My video https://www.youtube.com/watch?v=dQAY3xW3fSE

My bin

r19 · **Posted:** Thu Mar 10, 2022 7:37 pm

Great result mate! Thanks for sharing your bin

I want to make just small burbles. Something like this
https://www.youtube.com/watch?v=hIh272UH0y0
Have someone did it?

daniel_rs · **Joined:** Wed Aug 25, 2021 10:14 am **Posts:** 21

Hello! I made popcorn on a friend's e36 323 car https://www.youtube.com/watch?v=dQAY3xW3fSE.
Firmware from e36 body version ms41.0, the car never had an air conditioner.
I wanted to make popcorn only when the air conditioner is on.
AC on - popcorn on
AC off - popcorn off
We connected the ground through a button on a 5 pin x20 connector. And fixed Fuel Restore - RPM and Ignition Retard - Decreasing TPS (Closed) to Fuel Restore - RPM (AC on) and Ignition Retard - Decreasing TPS (Closed) (AC on). When we turn on the button, the idle speed gets higher. In INPA, it shows that the air conditioner is on, but there is an error in the air conditioner relay. When the AC is on, there is no popcorn, the Fuel Restore - RPM map works, not the Fuel Restore - RPM (AC on).
How to make the map work (Fuel Restore - RPM (AC on) ?

daniel_rs · **Joined:** Wed Aug 25, 2021 10:14 am **Posts:** 21

r19 wrote:

Great result mate! Thanks for sharing your bin

I want to make just small burbles. Something like this
https://www.youtube.com/watch?v=hIh272UH0y0
Have someone did it?

Bro read the topic, here they wrote about it on all 37 pages. Try it in different ways, for each machine its own parameters. You have to test and try until it works.

Bimmer12 · **Joined:** Mon Dec 14, 2020 5:13 pm **Posts:** 134

is it possible to get a pop with flame without having to put the pops ando bangs? I can't get a strong flame explosion if I don't add pops and bangs to the deceleration, someone got the result

mmm111iii · **Joined:** Wed Mar 30, 2022 11:58 am **Posts:** 1

Hello guys, i need help with my E36 325i bosch 405 non vanos, i want to achieve pops and bangs.
here is my bin.

maniaczv · **Joined:** Sat Nov 30, 2019 6:42 pm **Posts:** 1

itam97 wrote:

Thank u all!!!

Finally i achieved some decent flames from my exhaust

Engine is stock M52B25 and 2.5' exhaust with 2 turbo works mufflers.

Here is the result ---> https://www.youtube.com/watch?v=SEFmvj6YD90

Greetings from Poland

please send my your map to email :oops:

Fabio · **Posted:** Sun Apr 10, 2022 8:03 pm

daniel_rs wrote:

Hello! I made popcorn on a friend's e36 323 car https://www.youtube.com/watch?v=dQAY3xW3fSE.
Firmware from e36 body version ms41.0, the car never had an air conditioner.
I wanted to make popcorn only when the air conditioner is on.
AC on - popcorn on
AC off - popcorn off
We connected the ground through a button on a 5 pin x20 connector. And fixed Fuel Restore - RPM and Ignition Retard - Decreasing TPS (Closed) to Fuel Restore - RPM (AC on) and Ignition Retard - Decreasing TPS (Closed) (AC on). When we turn on the button, the idle speed gets higher. In INPA, it shows that the air conditioner is on, but there is an error in the air conditioner relay. When the AC is on, there is no popcorn, the Fuel Restore - RPM map works, not the Fuel Restore - RPM (AC on).
How to make the map work (Fuel Restore - RPM (AC on) ?

Did You figure out the problem ?

RomRaider

Forum rules

Deceleration

Who is online