RomRaider

Today I deleted the ews out of my e36 323i and tries to start it with no avail, I wanted to see if I could have some insight of were to start next, I had six codes pop up "p0505, p0111, p0161,p0135, p0155, and p0600". It's getting spark, fuel, and air. I'm not sure where to go to next, I was thinking the cam position sensor but am unsure, or maybe the new dme I got is bricked? Also the old owner tried putting a red label in it and starting it up, I'm not sure why or what it could've done, but any guidance would be amazing and thank you all to made and refined this forum, it's helped a lot during the process of getting the ews deleted. Thank you for your time

Does it even crank?

Hey man sorry about not answering back I've been working on it, yeah it cranks but will not start, I deleted the ews off the dme but from what I've been seeing is that I would have to align the ews with the new dme still in which I didn't know, if that's correct atleast so I will be trying that tomorrow morning, if this doesn't work I don't know what will cause I've replaced everything else that causes a crank no start and tested everything that would cause one with no issues other then the dme causing the problem.