Hello,
I'm working on my S52B32 swapped E30 and it has an MS42.2 ECU. I am trying to get rid of the EVAP CEL so I can take it in for emissions. For some reason when I use the MS41 portal setting as shown, then doing a full flash I still get the CEL. The harness on my car is kinda s*** but I didn't make it so I planned on making a new one from another harness I have. The person who made the harness cut the wire at the ECU for the solenoid. I could solder a new wire on and run the solenoid but that I'm trying to avoid that right now. Is there something I'm not understanding about the flash process or missing something that is preventing me from getting the changes to stick?
Thanks,
Here's the settings I set
