RomRaider

Hey folks.
So i've converted my file from when my car got dynoed and mapped a couple years ago.
Ive converted the file from a COD-file to a BIN-file. (Map was done in wols)
The file is a 32,9Kb file, which i can open in Romraider, but does not show any categories or folders.
Is there a way, i can open this file and see what has been done, or do i strictly need to have wols?

I know this is years later, but hopefully my response can help anyone who comes across this post.

My background is mostly TunerPro software, but the same applies to RomRaider.

To view the Bin File, you need a XDF File, which is basically a template that helps you organise and interpret the data. You will need to make sure your XDF is for the correct firmware version of your ECU, for example 01100C6, but yours may be different. You also need to make sure your XDF matches your file size, in your case a partial read file would use the 32k XDF also.

If anything is unclear, just let me know.

Hey man!
Ive tried with different XDF definitions, even tried to open it in TunerPro software with an AD partial bin definition.
But no luck yet.
I'm however still curious about what is done with the file, so here years later still trying.
Maybe i can send you the bin, and youll get it to work?

Send me the bin and I would be happy to take a look