 |
RomRaiderOpen Source ECU Tools |
|
RomRaider
Documentation
Community
Developers
|
 
|
Page 1 of 1
|
[ 2 posts ] |
|
| Author |
Message |
|
BigTrabls
|
Post subject: sh7051  Posted: Sat Oct 11, 2025 2:44 pm |
|
 |
| Newbie |
Joined: Fri Aug 01, 2025 5:11 am
Posts: 1
|
|
I need help with flashing my sh7051. The fdt log shows this.
This is an unsupported freeware version
FDT API initialised: version 3, 07, 00, 007
Clock Frequency = 0.0000MHz, Clock Mode = 0, CKM = 1, and CKP = N/A
Connecting to device 'SH/7051F' on 'COM6'
Configuration:
'BOOT Mode' connection - using emulated interface
Opening port 'COM6' ...
Loading Comms DLL
Loaded Comms DLL
Initiating BOOT SCI sequence
Attempting 9600
Received immediate response from device: 0xAA
Using micro-Kernel : 'C:\Program Files (x86)\Renesas\FDT3.07\Kernels\ProtA\7050\Hitachi\0_0_00\uGen7050.cde'
Downloading and verifying micro kernel...
Device is erasing...
Erase Timeout value set to 11 seconds
Erase Successful
micro-Kernel download successful
Changing baud rate to 57600 bps
Error No 15005: 'COM6' read time out
Error No 15048: Failed to retrieve BRR Value from target
Error No 15016: Changing baud rate to 57600 bps
|
|
| Top |
|
 |
|
fenugrec
|
Post subject: Re: sh7051 Posted: Sun Oct 12, 2025 12:34 am |
|
|
| Experienced |
 |
Joined: Wed Jan 08, 2014 11:07 pm
Posts: 652
|
|
you will need some hardware to keep the WDT pin happy. This is documented in the unbricking thread (pinned)
_________________
If you like nisprog + npkern, you can support me via https://liberapay.com/fenugrec/
For sending me encrypted/secure messages, use PGP key 0xBAC61AEB3A3E6531 available from pool.sks-keyservers.net
|
|
| Top |
|
|
|
|
Page 1 of 1
|
[ 2 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 1 guest |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
|
