Hello all!
In CF48D I've found CIDTBL, Test Item, I/O Control, LID, SRLTBL, WDLID, SWMONT, etc "Distinction Flag X-Y" So for example,
<table name="CIDTBL Distinction Flag 1100H-111FH" storageaddress="0xB547"/> (mSCID10 A2L)
<table name="CIDTBL Distinction Flag 1140H-145FH" storageaddress="0xB54B"/> (mSCID114 A2L)
<table name="I/O Control Distinction Flag 00H-1FH" storageaddress="0xB57B"/> (mSIOID0 A2L)
<table name="I/O Control Distinction Flag 20H-3FH" storageaddress="0xB57F"/> (mSIOID2 A2L)
<table name="I/O Control Distinction Flag 40H-5FH" storageaddress="0xB583"/> (mSIOID4 A2L)
<table name="I/O Control Distinction Flag 60H-7FH" storageaddress="0xB587"/> (mSIOID6 A2L)
So I know A33B has a CID spreadsheet, but it doesn't seem to contain any of the other distinction flags. How exactly would I go about adding them to the definition template? Would it be setup in a similar way to the CID options and be toggleable? Alongside this, how would I go about figuring out what exactly 00H-1FH means for the I/O controls? Because I THINK I can just follow along with the CID spreadsheet for the CIDs, but I doubt I can do anything similar with I/O and the rest.
Please note, I'm going off the A2L's names and haven't gone in and verified that these are under the proper names or not. BUT these maps are in the exact same location as the A2L's and lined up decently well so I'm at least confident that they'll all relate to flags.
LASTLY, are all ROM based flags toggleable? Meaning, you could check or uncheck the box and flash to your ECU?
