RomRaider

@pytrex, @bradsm87 ,
here's a test kernel build that clears RAM just before resetting, when you 'stopkernel'. Untested, sorry. Short on time.

>>>>>> Others : if you don't know what this is and what it's supposed to do, DO NOT USE !! <<<<<<<

Results;
- RAM Area was properly Reset!
- P0605 Occurs (Stored in EEPROM probably)
- Key On/Off Required (Can't clear P0605 until having done so)
- Normal Idle and Overall Operation

So it definitely seems to reset everything back to their default values! As long as I'm understanding the stopkernel correctly (it writes 0 to every RAM block), then I'd say it works like a charm for SH7058! I'd be interested to see if the spark plugs firing issue still occurs for whoever has that issue.



What's funny is, knowing Bradsm87's luck, his engine is probably gonna catch fire or some wild crap like that haha

I've never had it make my own engine go pop but it has done in the past on other vehicles. I can't really test for coils firing because it only ignited probably 1 in 6-8 times. It's hard to know whether it was firing every time and there wasn't enough residual fuel to ignite or if it only fired coils sometimes.

I can test for P0605 over the next day or so but if P0605 still happens for you, VC269 and VD70A will probably be the same.