RomRaider

I've used my device multiple times before and all of a sudden I'm hit with this error. I noticed it when I would attempt to run Learning View to see how my car is running. Before a quick driver uninstall and re-boot/reinstall would fix it, but now I'm to the point where that is not working. I've completely removed my ECUFlash software as well as all the listed Tactrix drivers, Uninstalled the device from the port listing and reinstalled everything and I still get the same error.

[13:31:54.609] J2534 error [device not responding].
[13:31:54.609] unable to connect to vehicle interface.
[13:31:54.609] interface close

Here is the Error from Learning view.

[13:41:43.3125000] Learning View version 0.6a
[13:41:48.2812500] PassThruOpen returned 7 and DeviceID 0
[13:41:48.2968750] PassThruGetLastError returned 7, Message: device not responding
[13:41:48.5156250] COM10 open
[13:41:48.5468750] ECU Init
[13:41:48.5468750] WRITE 6 bytes: 80 10 F0 01 BF 40
[13:41:48.6718750] READ 0 bytes:
[13:41:49.7968750] No response to ECU Init
[13:41:49.8125000] COM10 closed

I have this just on my bench and through any program if I click read on ECUFlash, or connect on Learning view I would normally get a blink of one of the LED's And I'm getting nothing. They are just continuing to fade from blue to green to red... and back. I've tried different cables, and I've tried different ports.... Any input on this would be greatly appreciated. I would really like to get my tuning ability's back.