RomRaider

Hi - I'm Looking for the following tables for 2016 USDM STI - AE201v -- Rom is attached to the post

Ignition Timing Compensation (Cold Start) Activation (Max. Coolant Temp)
Ignition Timing Compensation (Cold Start) Min. Limit (Default)


Wall Wetting Comp (Group 1A) Base Adder (or all transient fueling tables)

Closed Loop Fueling Target Force Open Loop Exit (Rich Limit)
Closed Loop Fueling Target Dynamic Lean Limit Floor
Closed/Open Loop Transition Main (Closed Loop Fueling Target)(Closed Loop Switch Lean Threshold)
Closed/Open Loop Transition Main (Closed Loop Fueling Target)(Open Loop Switch Rich Adder)
Closed Loop Delay Max. Load vs. RPM Component Threshold (Smoothing Factor 1)
Closed Loop Delay Max. Load vs. RPM Component Threshold (Smoothing Factor 2)
Closed Loop Delay Max. Load vs. RPM Component Threshold (Smoothing Factor 3)

I don't know what this means, but, I can see all of the closed loop tables in ecuedit, but they're in-active.

My ecuflash definition has all of the wall wetting tables (transient fueling) but they are not active either.

I've not yet seen any of the cold start tables active or inactive.

I have a few bucks - let me know how much. Would like these asap and will pay accordingly. Thanks.